Saeco #444 200 grain What do your mic at?

[Just Duke]

I was hoping these run a little on the large size. I need .429 or over. The SAECO catalog says .428 for 44-40.

Saeco 4-Cavity Bullet Mold #444 44-40 200 GRAIN


TIA.
Duke

[243winxb]

My Saeco moulds in 45acp , 44mag. & 38 drop bullets on the large side from .002" to .004" using most alloys. Your bullet is listed as needing a sizing die of .428" so i would guess the bullets will drop at .430" Add antimony to make them larger if needed.