512 500lfn prices

[Lloyd Smale]

We offer a two cavity in a three cavity block for $78.00
A three cavity in a four cavity block for $84.00
And a four cavity in a five cavity block for $91.00
Add $10.00 ea. for a order of ten or more up to 15.

this was from a pm from swede nelson
We only had 8 intersted but he said hed charge the same price as 10 and keep two for inventory. Everyone still in? Lets have a final count. Im in for two 3 cav in a four cav block with one hped. he didnt let me know what the price to hp a cavity is so maybe he will chime in here with that and how to go about paying him.

[stubshaft]

LLoyd,

Put me down for 1 - 4 cavity in 5 block.

Stub

[only1asterisk]

Did you ever decide on a design?

[SwedeNelson]

Lloyd Smale

Price for a hollow point we be the
same as all our buys $35.00

We will need to have a drawing or
more information on your design.

Get me the information and we will
start the buy.

Swede Nelson

[Lloyd Smale]

is this what you need or do you need more info. http://castboolits.gunloads.com/showthread.php?t=61480

[MDF99]

I'm in for one 3 cav. in a 4 cav. block.

[JFE]

SwedeNelson - is there any chance of making this available in the RG-HP style moulds you've been working on?

Interchangeable FN or HP pins would be something I'd like to try.

Joe

[Muskwa]

I would like a 3-4 cavity 500Gr.LFN gas checked or plain base;
I will take one.

Muskwa

[RANGER RICK]

Lloyd

I am in for a 4 cavity mold with one cavity a hollow point if possible .

RR

[SwedeNelson]

http://castboolits.gunloads.com/picture.php?albumid=145&pictureid=1331

513-500 FN GC

This is based on the Onty designed bullet See post #3
http://castboolits.gunloads.com/showthread.php?t=61616

This is how N.O.E. is going to run our group buy.

You can ether PM or E-mail me at (pbsco1 @ qwestoffice.net) with
what you want. Will post a running list of user name and how many
cavities / options. When we get 10 on the list the order will go in for
the tooling. It takes two to three weeks for the tooling to get in.
We will keep the buy open until the tooling gets in.

At that time we will close the buy and ask you to send in your
payment.

It will take another three to four weeks to run the moulds.

This buy will be on our LB (Large Bore) moulds.
This is a over sized mould for better heat control.
We will also offer it in the RG2 and RG4 (large bore) hollow point moulds.

Prices will be as follows:
Single cavity mould (Standard Size mould) $78.00 Ea.
Double cavity mould (2CLB) $88.00 Ea.
Three cavity mould (3CLB) $94.00 Ea.
Four cavity mould (4CLB) $101.00 Ea.
Two cavity RG2 LB mould $112.00 Ea.
Four cavity RG4 LB mould $142.00 Ea.
Plus $10.00 Shipping/Handling. ($20.00 Foreign)
Prices are subject to change at any time.

ABOVE PRICES are based on a min. order of 10, deduct
$10.00 ea. if we get 15 orders.

You can mix number of cavities in an order to make 10.
We will offer gas check only on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.

Our mailing address is:
Night Owl Enterprises
1645 W 150 N
Provo, Utah 84601
801 377-7289

Zip Code List
05252
96744
99603
49862
13326
64093
45327
3122
89143
V0W 1A0



Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders:
1 stubshaft 4 cavity
2 MDF99 RG4
3 JFE RG2
4 muskwa 3 cavity
5 ranger rick 4 cavity w/HP
6 EDK 4 cavity w/2HP
7 Blake Stephenson 3 cavity w/HP
8 Lloyd Smale (2) 3 cavity w/HP
9 dubber123 RG2
10 clyde 2 cavity
11 Screwbolts 3 cavity

Thanks
Swede Nelson

[EDK]

I would take pride in being in on this one. 4-cavity, with two HP. My 86 50-110 is dancing is the vault already!!


Rich
The Idaho Sharpshooter

[JFE]

Gents

comments made by Doug Turnbull about this design suggest that some 50/110 conversions may have problems feeding & cycling this bullet in its current form. My 50/110 conversion already feeds and cycles a bullet of similar dimensions so I dont anticipate a problem in my case, but it seems others may have an issue.

I've asked Doug for design changes he'd suggest, so that we can try to accommodate as many potential users as possible.

Joe

[Blake Stephenson]

I am in for one. Make mine a three cavity with one hollow point.

Let me know when and where to send the money.

[MDF99]

Please change my order to a 4-Cavity RG4 LB mould instead of the 3-Cavity 3CLB mold. Thanks.

[SwedeNelson]

Two more and we can get started.

Swede Nelson

[dubber123]

I just noticed this one, is the 500 gr. weight projected in HP form, or is that the weight of a solid? Thanks.

[SwedeNelson]

dubber123

500Gr. Flat nose
480Gr.+- Hollow point

Swede Nelson

[RANGER RICK]

Looking forward to this mold .
Just two more to go !!!!!
RR

[stubshaft]

This was from a pm from swede nelson
We only had 8 intersted but he said hed charge the same price as 10 and keep two for inventory.

I make the count at 9 as it stands (Lloyd is in for 2). Am I mistaken?

[dubber123]

(Sigh),..... I'll take a 2 cavity RG2. Thanks.

[Clyde]

I will take a two cavity mould.

[SwedeNelson]

stubshaft

Your right.
Lets get this one going.
Will order tooling in the morning.
Will send out a PM to all with cost.

Thanks
Swede Nelson

[Screwbolts]

I would like to be in on this also, please put me down for a Three cavity mold (3CLB) $94.00 Ea.

Ken Hall ( Screwbolts)

central NY

[SwedeNelson]

This buy is closed.
If you havent got you money in yet please do so now.
Thanks for the orders.

Swede Nelson

[RANGER RICK]

Drooling !!!!!!!

RR

[stubshaft]

Where are we with this mold now?

[DUKE NUKEM]

Let me know if any 4 cavities are available. No hollow point.
TIA,
Duke

[SwedeNelson]

Duke

Got you on the list.
PM sent.

Swede Nelson

[SwedeNelson]

Cast with the first RG mould for this buy.
Works great. Dimensions are on, gas check
a snap fit weight with hollow point 457.7Gr.
flat nose 498.5Gr.
http://i69.photobucket.com/albums/i80/swedenelson/512FN500Gr.jpg

Got them out in the mail and on the way.

Swede Nelson

[Lloyd Smale]

looks great. Ive been in a pile of these group buys but this one excites me more then the rest put together.

[RANGER RICK]

Looks great Swede.
I am also looking forward to sending some down range .


RR

[Clyde]

64093 - Mine arrived today in great shape. Thanks!

[MDF99]

The 512-RG4 arrived and I'm impressed. Now it's time to fire up the lead pot, thanks! :drinks: :drinks:

[dubber123]

Knew I shoulda checked the mail today...

[stubshaft]

96744 - Got it!

Looks great, thanks Al.

[dubber123]

Mine arrived today, and looks fantastic. I think I'll go warm up the pot now... Thanks Al!

Update: I just tried mine, using straight WW's, (will switch to 50/50 WW-Pb later), My mould drops right at a light .513", and both cavities within .0005" of round. Weight was 454.5, +/- 1/2 grain. This is my first RG type mould, and they seem to require a little finesse to figure out how they want to be used, but once I did, they are very close to the speed of a normal non-HP mould. WAY faster than the removeable pin type I have been using. Good job Al!

[Screwbolts]

Another piece of my Art collection arrived yesterday, :-) and my pot is hot from casting the 22-055 FN NOE.

Ken

[RANGER RICK]

My two molds arrived today and boy what a work of art they are .
The RG4 mold is to nice to use .
Now I am looking forward to the other RG4 molds coming in.
Thanks Swede for a great product and I like that the molds are stamped USA !!!!!

R

[Lloyd Smale]

got mine yesterday and the pots fired up as we speak. Id like to thank you AL for doing this one! I know there probably wasnt enough volume for you to make much off of it.

[Onty]

Cast with the first RG mould for this buy.
Works great. Dimensions are on, gas check
a snap fit

weight ....flat nose 498.5Gr.
http://i69.photobucket.com/albums/i80/swedenelson/512FN500Gr.jpg


Swede Nelson

Congratulation Swede! They look great.

Do you have any picture of FP? Looks like I was close regarding weight of solid nose version. However, no matter how good is design, if mould is not made right, forget it.

Anybody fired some "fouling shots" with one of these?

For next project, I would like to propose 455-265HB. Swede, let me know if you think you can have enough customers for this one. Last time I posted about this boolit I did not get too much interest. However, considering that RCBS 455HB is about $120, your 4 cavity for $142 is a bargan. I am quite confident that once 455 (and 45) shooters see this mould out, they will knock on your door...

[JFE]

Been eagerly awaiting mine and it finally arrived today. The mould was very well packed and it didnt disappoint either. This is my first NOE mould and I dare say it wont be my last. Quality is top notch.

Al - thanks for doing this low volume group buy too. Its really appreciated.

[Onty]

Anybody tested these boolits? Just curious about their accuracy, are you happy with them? Thanks, Onty.

[Lloyd Smale]

the solid version shoots real well out of my alaskan but to be honest i really havent given it a try in the linebaughs yet