PDA

View Full Version : Spray Moly or Spray Teflon


libbyman
04-12-2006, 06:03 PM
Has anyone tried either of these sprays?
And what results heve you had? Good or bad.
Libbyman
Dale53
04-12-2006, 06:15 PM
"Dry" spray teflon works quite well in my door locks...[smilie=1:

Dale53
mooman76
04-12-2006, 10:24 PM
I have used the spray moly as a mould release. it work good but builds up after while and starts flaking off and needs to be removed. It is posible to reduce you bullet size by a thosand or two if needed!
44man
04-13-2006, 08:14 AM
No Teflon! Most have an oil base carrier as do some of the spray moly stuff. Make sure there is no oil in your moly. Read the can before you buy it.
I have also heard some of the Teflon lubes are bad for bores.
I have spray moly and spray dry graphite but it seems as if Rapine mould prep works better. I also have moly powder that I mix with alcohol and it works OK.