couple molds i wish someone would take up

[Lloyd Smale]

first an exact copy of the 98 grain rcbs swc .32 mold. This bullet flat shoots in all of my 32mags and 3220s and a .401 light weight round nose for the 610s and 646s

[Bodydoc447]

I'd be in for the .32 SWC, Lloyd. Now to find 23 other guys and one who is willing to be the honcho..................

Doc

[Buckshot]

...............Lloyd, if you want one, do it. Costs you nothing. See if 45 2.1 or Tom Myers will draw it for you.

Decide if your design measurements will be alloy or actual cavity based.

Place a time limit on the offering (getting or not getting the 25) if you wish, or lacking the 25, decide amongst those interested if you will bear the setup fee and divide it amongst the subscribers.

Honchoing the design does not require up front money, a college degree or anything else. It flys or it doesn't. You as honcho decide.

................Buckshot

[ktw]

I'd be in for the .32 SWC, Lloyd. Now to find 23 other guys and one who is willing to be the honcho..................

I need a 32 mold. I'd be satisfied with a LEE copy of either

- the RCBS 98 gr SWC Lloyd describes
- the Ballisti-cast 665/H&G 65 (98 gr) or
- the Ballisticast 667/H&G 67 (115gr)

I'm not picky about which one of those three I end up with.

-ktw

[Junior1942]

I need a 6-hole soup can which casts like the factory 2-hole soup can, i.e., .309" to .310".

[Lloyd Smale]

Im basically a lazy bastard and would need a honcho too but if anyones interested that little rcbs bullet is a real shooter.

[Char-Gar]

Loyd..A few guys can't do all the lifting...Cowboy up and honcho the deal. It isn't very difficult. Requires some time, but nothing "untoward". Biggest problem is managing the hoards..but I about got that figured out. Tell them you won't take any crap and stick to it! For the most part they are good folks and don't have unreasonable expectations.

[Lloyd Smale]

ive just got no personality for dealing with people and problems. Id take 3 of them if someone wanted to get it going though