PDA

View Full Version : is this possible?


canuck4570
07-30-2009, 09:02 PM
well yes it is

A few weeks ago I asked it this was possible to take the pin of a lube seizer die and have it countersink so the shank of a gaz check bullet would fit in and while lubing would prevent the lube from lubing the portion of the gaz check bullet.
My son machined me such a pin a it works beautifully
lube some 150 bullet and no problem
a picture is worth a thousand wordshttp://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0519.jpg
the wall of the pin are .010 thousand and surprisingly solid ( same as a gaz check itself even harder since the pin is steelhttp://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0522.jpg
here is a picture of a bullet has it is seating on the pin before going in the seizer die
http://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0523.jpg
here are some bullet has they come out of the seizer die et "voila" no lube on the skank
so now when I want gaz check bullet I use the solid pin and when I wish no gaz check and no lube I use the cutersink pin
My hope is that Buck shot would offer this service to you all casters I would be honered...
Canuck
Buckshot
07-31-2009, 01:41 AM
...........Well, there you have it, it DOES work :-) Looks like some good work too.

................Buckshot
mrbill2
07-31-2009, 06:36 AM
You can do the samething for bevel base bullets.
Mr. Bill2
canuck4570
07-31-2009, 09:06 AM
...........Well, there you have it, it DOES work :-) Looks like some good work too.

................Buckshot
yes, my son told me you have to take a good grade of metal that lends itself to smooth machining.... I am certain you know what he means just looking at your works
by the way my son Pascal say's thank you......
canuck4570
07-31-2009, 09:07 AM
You can do the samething for bevel base bullets.
Mr. Bill2
yes Bill2 just have to machine the pin accordingly but you will have to remove more in the center of the pin in order to create a pressure ring with the same inclination of the bullet around it so the lube won't go under
mrbill2
07-31-2009, 08:23 PM
OK, No problem.
Mr. Bill2
Charlie Sometimes
07-31-2009, 08:31 PM
Upside-down nose punch.
canuck4570
07-31-2009, 08:35 PM
you got the idea
mike in co
07-31-2009, 10:25 PM
so ask him what metal he used...
i do all my 44 mag that way( well over 90%)....
may have to build one for the 44hp miha just did...sure would be neater.

mike in co
canuck4570
08-01-2009, 12:59 AM
so ask him what metal he used...
i do all my 44 mag that way( well over 90%)....
may have to build one for the 44hp miha just did...sure would be neater.

mike in co
has soon has he come in saturday night I will let you know