8mm boolits

[Blammer]

Ok Here are my two newest acquisitions in the 8mm category.
http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/8mm/DSCN7648.jpg

You'd think with all the 8mm boolits and moulds I have I'd be shooting more 8mm!

I just need a top punch for the really pointy one now....

[mroliver77]

Looks like 323366 and 323481. That 481 looks alot like a 311413 mold I have. Good shootin boolit if not pushed too hard. I need more 8mm molds!
We will be waiting for a range report.
Jay

[Shiloh]

Like wise on the range report. I am looking to acquire am 8mm mold. There is this Yugo Mauser with a mint bore....

Shiloh

[Hardcast416taylor]

Hey Blammer. I use a #329 Lyman top punch for the spire point Lyman mould. I know it took me awhile to come across one. I made a poor copy using a drill press and alot of checking fit and grinding a bit more in the nose cavity.Robert

[Blammer]

yep, forgot to put the mould number

323366 and the 323481

[Bret4207]

Be very careful of runout on the 366. You need to get the long, unsupported nose started nice and straight. Designs like that tend to be very finicky. Lets hope yours proves the exception.