WTT: Lyman .358" H&I Die

[Magnum Mike]

WTT: Lyman .358" H&I Die

I have a nice condition .358" die that i would like to swap for shtuff...

http://i3.ebayimg.com/03/i/03/cf/fe/fd_1_b.JPG

I am most interested in 41 caliber stuff...

[Magnum Mike]

Anyone??

[C1PNR]

Unfortunately I need the .358 (and a .359 as well), but I don't have anything "extra" in .41 Cal. I have an extra .410 sizer, but was planning to get it honed out to .411 or .412.

If cash would work, PM or email me.

[Magnum Mike]

Email sent...

[azrednek]

Whom will hone a sizing die out a thousand or two?? Do you do it yourself? I'm looking to open my .410 to 411 or 412. My attempt several years ago opening a Lee die was a failure.

[C1PNR]

I'm so recently back in town, I don't have a person in mind.

Now that I think on it a little more than a nanosecond, maybe I'll take it up to my favorite Gunsmith. Tony Fanelli at Blue Arms in Horseshoe Bend, ID, has done a lot of good work for me, including some lathe work. I'll ask him first and then go from there.

Thanks for asking and forcing me to "engage brain" and think just a bit.

[Magnum Mike]

SOLD!

http://www.sizingdie.com/index.htm Still Tool & Die will hone out existing dies.