jmorris
07-22-2009, 08:01 AM
I’ve just been using doubled over masking tape around the edges for years but I finally decided to do something a little more permanent. I just cut a section of box tubing at an angle and tacked it to the bracket so they fall to the bottom of the cup and can’t bounce out. While I was at it I added a flap at the front but I bet it’s not needed.
http://i664.photobucket.com/albums/vv5/qvideo/650/primercup.jpg
http://i664.photobucket.com/albums/vv5/qvideo/650/pricup.jpg
http://i664.photobucket.com/albums/vv5/qvideo/650/primercup.jpg
http://i664.photobucket.com/albums/vv5/qvideo/650/pricup.jpg