Book on smelting and alloying

[odinohi]

What is a good book or books to buy for a novice like myself to learn the right way of doing things? Thanks for any info, Tom

[KAF]

An excellent book for new or old casters.

http://www.riflemagazine.com/catalog/detail.cfm?ProductID=809

It is full of information and even tells how to cast bullets from Zinc.

[Bret4207]

The Art of Bullet Casting is excellent. So is the Lyman Cast Bullet Handbook, and the NRA Cast Bullets book if you can find it.

[MT Gianni]

Running searchs here and copy and paste then putting it in a thumb drive or printing will serve you almost as well. Spend a day on searchs and see what you can find. Gianni

[cuzinbruce]

Hi,
Best book on smelting and alloying I have found is "The Handbook of Commercial Bullet Casting" by Paul Moore. Published by Magma Engineering (makers of Magma casters and Star sizers).
Good Luck
Bruce

[fredj338]

The Lyman Cast Bullet Hanbook is great. The LASC site has a ton of good info on all aspects of alloys. http://www.lasc.us/CastBulletNotes.htm