PDA

View Full Version : Warning - Blammers Gas Checks



Sprue
07-16-2009, 06:34 PM
They're only good for one firing.

Ya just can't buy anything that lasts these days........

leadman
07-16-2009, 06:45 PM
Maybe you could have one of the machinist on this site make a die so you can restore the gas checks?

beagle
07-16-2009, 07:02 PM
Now, I've recovered some from plate shooting that I just beleive could be reformed and shot again.

I have reshot 230 grain FMJ .45 ACP bullets a few times just to see if I could./beagle

gon2shoot
07-16-2009, 07:11 PM
Must be somthing about things sold off this site, I've had the same problem with loob grooves. Never been able to find a single one. Just a little indentation where they used too be. [smilie=1:

leadman
07-16-2009, 08:49 PM
Now don't give this site a bad name!

Johnch
07-16-2009, 09:47 PM
I recovered and fired a 400 gr 45 cal boolet a while back

After the first time down the barrel
It just had lands & groves on the boolet
So I reloaded it

I bet you could figure out how to reuse those GC's
If you had to

BTW I love those Gator checks

John

geargnasher
07-16-2009, 11:04 PM
Must be somthing about things sold off this site, I've had the same problem with loob grooves. Never been able to find a single one. Just a little indentation where they used too be. [smilie=1:

I know it! But I do occasionally find one when I sweep the reloading room floor.:kidding:

Gear

briang
07-17-2009, 12:36 AM
They're only good for one firing.

Ya just can't buy anything that lasts these days........

:groner:

RP
07-17-2009, 12:40 AM
one day someone is going to find a easy cheap way to reuse primers and when they do it will be the day i finally dump the five gal bucket i keep them in. Been thinking about useing them in shotgun shells

Sprue
07-17-2009, 01:09 AM
Yeah, I had that conversation with the little fella on my shoulder just last night as I went to empty the spent primer catcher. Figured that I had better dump 'em before they ended up on the floor. The idea of Pack'n er Tight & Stack'n er High needs re-vamped.

Tom W.
07-17-2009, 04:57 AM
I dropped a whole box of those loob grooves the other day.. Still tripping on the darn things.

JeffinNZ
07-17-2009, 04:38 PM
I know what you mean. Primers are the worst. The last batch I bought all worked fine the first time but the second time round were hopeless................ No wonder there is a storage if folk have to keep buying NEW ones each time.