lee .395 round ball mold

[mainiac]

where am i going to find one of these in double cavitity? Need one for my new flinter,and everybodies on back order!!

[docone31]

Get some .395 balls from someone, and order the mold from Cabelas. They are backordered, but they keep you in line untill it is filled.
I have had my .454 mold on order since April. I keep on the list. Sooner or later, it will happen.

[jack19512]

Good luck, :( just went through this myself for my 54 cal Lyman ML. Only place I could find one was eBay and it was used. I do have one on back order from Midway that is suppose to come in late this month.

[jack19512]

I have had my .454 mold on order since April. I keep on the list. Sooner or later, it will happen.









I don't know if you are interested in this or not.

http://cgi.ebay.com/Lee-454-cal-Round-Ball-mold-die-with-handles_W0QQitemZ320379712564QQcmdZViewItemQQptZLH _DefaultDomain_0?hash=item4a981e7434&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|240%3A13 18|301%3A1|293%3A1|294%3A50

[6pt-sika]

If it were me I would call NEI and get a 5 or 6 cavity mold I think [smilie=1:

They "supposedly" will get it to you in 2 weeks which usually turns into about 6 weeks .

[northmn]

At their cost, I use swaged for my 40 as a couple of hundred lasts me a long time. While I recently got a buy on pure lead, it still costs. Whether to cast or buy depends on the amount you shoot. I just ordered 5 lbs of #3 buckshot for a 25 I am building. No mold for it. thinking about it, I when I bought mold for the 40, they were only made in single cavity. NEI would get you a good mold but I could buy a lifetimes supply of swaged for the cos tof the mold.

Northmn

[northmn]

Just checked and Graf's had one in stock

Northmn

[mainiac]

Just checked and Graf's had one in stock

Northmn

Northmn,thanks alot! Somehow forgot about grafs,,,went there today,and sure anuff,they had 1 in stock. Its headin north!!thanks,mark