canuck4570
03-06-2006, 12:54 PM
I was given 4 stick of this grease .. dimension of the stick is 2.5 inches across and 10 inches high....this grease is use tho lubricate polishing wheels and belts....and I was confirm by Mr. Alfred O campo who is a chemist at this companie that there where no abrasive in the grease wich is animal fat plus ingredients to make firm.... I have 2 kind one soft and one hard .... but both applies very well on bullets...I have the names of 6 companies around the US who carries this products.... I will try some the next time I go shooting with a known accurate loads with alox and tell you the result....the cost of this lube is 5.75 Canadian so in the US it should be lest....I have tested the melting point and it is higher than alox the test was simply made by puting alox and the grease in a pan on the stove and the alox melted before the grease. the product code his greasestick 4 (15020) a friend tried it in his 357 with full load all afternoon and no leading.... look good....