PDA

View Full Version : silver solder



cptkeybrd
05-08-2009, 12:49 AM
Anybody have info about using 96.5tin, 3.0silver, and .5 copper solder with some lead and wheelweights for makin boolits?
:Fire:

runfiverun
05-08-2009, 12:55 AM
just call it 100% tin and go with it.

Lloyd Smale
05-08-2009, 06:18 AM
I was given 20 lbs of it once on rolls. I used it just like runfiverun suggestests.

Slow Elk 45/70
05-08-2009, 10:17 AM
The fellows are right on, i have used it the same as 100% tin and see 0 difference in the cast boolit produced, IMHO

snaggdit
05-08-2009, 10:23 AM
On the upside, the alloy should work for werewolves:roll:

kawalekm
05-08-2009, 10:45 AM
On the upside, the alloy should work for werewolves:roll:

NO! Unless the bullet is pure silver the werewolf will be changed into a lawyer!

Ancesthntr
05-08-2009, 02:40 PM
And what would a lawyer be turned into?

sheepdog
05-08-2009, 03:17 PM
And what would a lawyer be turned into?

A politician. The worst of all. Unless you you shoot the lawyer in the heart, then he becomes an IRS auditor.

Sensai
05-08-2009, 03:43 PM
Now I know you're kidding. Lawyers don't have hearts!:lol:

softpoint
05-08-2009, 04:07 PM
I have a tiny amount of 60% silver solder. However, casting boolits out of it wouldn't be too economical.....:mrgreen: