lar's liquid lube

[waco]

this is my first time using it
lee 44 wadcutters drop from my mold at around .431 to .431 and a half
i just got the lube today
put a little in a butter dish
dropped in some boolits
swirled around until all was coated
then put on wax paper to dry
is this all i need to do before loading, or am i missing something?
thanx
waco:drinks:

[wiljen]

Nope - you gots it. If you dont need to size the bullets this is as easy as it gets.

[stubshaft]

It's so simple that you may think that you are missing a step, but you got it!

[geargnasher]

That's it. You can stand them up on the waxed paper or just dump them out and leave them lie, especially with full wadcutters it doesn't matter if the boolits have little flat spots in the lube. Obviously if you are sizing either size first and lube once or do what I do and coat, size, and recoat. If no leading with one coat just do that. Also, in my experience with wheelguns just leave the lube on the boolit tips, I have tried it both ways and makes no difference with my (lack of) shooting ability. Consider it lead preservative.

Gear