311041 typical as cast diameter

[arcticbreeze]

Can some of you guys that have this mold tell me what your boolits typically drop at using WWs?

[ktw]

I have two Lyman DC 311041 molds

In straight acww alloy they throw:
1) .3100-.3105 on the bands and .3000-.3005 on the nose.
2) .3110-.3115 on the bands and .3020-.3030 on the nose.

Most of my other lyman 30's match the first one as far as dimensions (.3105-ish)
I bought the first one new a couple of years ago. The second I picked up used somewhere.

-ktw

[TCFAN]

My Lyman DC 311041 is dated 6-07 and with boolits cast with 9 parts of WW and 1 part type they measure .3105 to .3110 on the bands and .301 on the nose.

[Ben]

I have a 31141 that is 30 years old.

A single cavity, nose on it with ACWW's is .302
Bands .312

Ben

[arcticbreeze]

Thanks guy, I just ordered one and with my luck mine will be small.

[jhalcott]

Mine's a biggie, with WW it drops .313 bands and .301 on the nose! it will wash off the grooves if I size it below .309!

[Larry Gibson]

My 31141 HP is 40+ years old and drops WWs + 2% tin at .311 on the driving bands. Cast of WWs + Lino at 60/40 they drop at .312.

Larry Gibson