borderghost
04-07-2009, 09:12 PM
Has anyone / heard of / had one / knew someone / Thinking of buying a Kahnke muzzle loader , they are made in Redwood Falls , MN , very small company ,(one man ) semi tradtional hammer, nipple, , what little i can find out
, they are a great little gun , great shooter , trigger pull is 2lbs or less , no creep , weigh bout 6lbs , alum frame is less , the finish sometimes is a little rough on receiver , I have a Knight long range hunter , shoots great , i alum bedded the action etc , gun is heavy to carry all day , and quite long in the brush , these little Kahnkes , can be ordered with any barrel length , I am thinking bout a 24 inch , and he tapers the barrel like a modern gun , any comments would be great.
, they are a great little gun , great shooter , trigger pull is 2lbs or less , no creep , weigh bout 6lbs , alum frame is less , the finish sometimes is a little rough on receiver , I have a Knight long range hunter , shoots great , i alum bedded the action etc , gun is heavy to carry all day , and quite long in the brush , these little Kahnkes , can be ordered with any barrel length , I am thinking bout a 24 inch , and he tapers the barrel like a modern gun , any comments would be great.