View Full Version : New Remington
EMC45
03-20-2009, 09:23 AM
Got a Remington the other day. 700 ADL with Bushnell Sportview. $295!!! Less than 15 rounds fired through it. Shot it at 100 yds with 130 gr. Speer Hot Cors over 50gr. IMR 4350. Pounded a 15 in steel plate soundly. Had the see through mounts on it and the factory adj. sights. Plus the heavy lawyered up trigger. Well got some 2 pc. Weaver mounts and had some Weaver rings already. Brought the scope down a good bit. Also reduced the trigger pull slightly. Now I have to rezero it. Any cast load suggestions out there?
GabbyM
03-20-2009, 09:29 AM
You forgot to tell us what caliber.
If you understand how to adjust the Remington triggers most of them will set up nicely.
mike in co
03-20-2009, 09:56 AM
if it aint a 270( the 130 bullets are a clue), then an "06.
just guessing
mike in co
EMC45
03-20-2009, 03:21 PM
Sorry guys. It's a .270 indeed. The trigger is a whole lot better now!
Any cast load suggestions out there?
RCBS 27-150-SP (oven heat treated wheelweights)
23.0-25.0 gr H4198
23.0 gr gives me 1900 fps over the chrono.
-ktw
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.