View Full Version : Lyman 45 sizer "o" ring

02-02-2006, 09:22 PM
I managed to pinch the o-ring during changing sizing dies and now it's pouring lube all over the place. I thought I saw where someone else had had the same problem a while back and had posted an ARP# or a size that could be picked up at one of the local auto parts stores. Does anyone remember what the size was or where it's posted?

02-02-2006, 09:43 PM
The size 35 is a dead-nuts fit on my 45. The others look close.

I hunted all over for hyrdraulics O rings, and had trouble finding what I needed, so I looked amongst the faucet repair parts.

Those I bought were made by Danco. Ten for $1.97


02-02-2006, 10:40 PM
Here is the thread.


02-03-2006, 08:15 AM
Many Thanks and Mucho Gracias for all the quick replies--- and I'm off to my local NAPA dealer as soon as the sun comes up!! Stan