**PIF THREAD** For items you have to give or need for free**

[mikenbarb]

Hello Folks, This is an idea I have and im hoping its going to be a BIG success with all the great members here on Cast Boolits. I would like to personally thank Ken for allowing me to post this to give it a try.:drinks:
It seems that alot of members here have items they no longer need or use that could be used by other members. This thread is for giving away your unwanted items to another member who can use them and for receiving items that you can use, For FREE.

RULES, PLEASE READ.- The rules are simple, If you take an item from a member please replace it with an item of similar value at the time of the request.(Example- Mikenbarb, I would like that Lyman 311375 and I will PIF with a Lyman 311291.) Its that simple.
**This thread is not a wish list or for trading a specific item for one you want because we have a page here for that already so please dont post wish list items. Any item(s) you offer for PIF will be shipped to the member asking for it at YOUR expense unless you work it out prior with the other member.
Please DO NOT use this thread as an opportunity to make a profit or to resell any item taken because thats not what these items are for. They are kindly being given away for free by members to members who can use them, Not to resell.
Try to keep the items offered related to casting, reloading, shooting, hunting, etc, etc. and please try to update your PIF's available from time to time to make sure the items are still available and the item you offered wasnt given to your buddy or something like that.
If you offer an item and dont take one but decide to later down the road, Just refer back to your reply# where you originally offered an item and didnt take one.
Reminder to members shipping smaller items, Small USPS flat rate boxes are under 5 bucks to ship anywhere in the US.

***PLEASE MARK ITEMS THAT WERE PIF'D TO ANOTHER MEMBER SO EVERYONE HERE KNOWS THEIR NO LONGER AVAILABLE. POST YOUR REPLY HERE FIRST FOR AN ITEM TAKEN AND THEN PM THE MEMBER OFFERING THAT ITEM WITH YOUR INFO. THANKS.
**If you cannot edit a post please notify myself or one of the moderators.**
**Moderators have the right to delete any posting at any time they feel necessary so please play nice and enjoy the kindness of others that offer their unwanted items here.**

This is a great site with some of the nicest people I have ever met and I hope this thread works the way I hope it to. Thanks in advance to all the members here that offer items and thanks again to Ken for this great site. Thanks much, Mike:drinks:
PS- Site donations are always accepted for items taken and please have a minimum of 15 posts or 20 days as a site member before posting in PIF thread.

OK, Lets get this rolling,,

[mikenbarb]

Im going to get this rolling and offer for PIF the following items and if you can use any please post what you would like and then PM me your info and I will mail it out,
1- 2 powder funnels. 1 rcbs and 1 MTM. For .22-.45 calibers.(Gone, PIF'd to rudyc)
2- 400pcs of 9mm brass. (Gone, PIF'd to Brenneman)
3- 2 Primer flip trays. 1 MTM and 1 RCBS. (GONE)
4- 1 can Lyman spray case lube.(Gone, PIF'd to no 1)

See, Now wasnt that easy.LOL.

[tonyb]

I've seen this on other forums, >SOME NOT ALL< turn into a gimme-I want thread.
If it is kept a PIF it would be great.

[mikenbarb]

Thats what were GOING to avoid Tony. Lets start this right with no negative comments please. This is NOT the other sites and I think this one has the best people out there as members.

[beanflip]

Well its about time............... If any one can get this going Mike is the guy !!!!![smilie=w:

[Muddy Creek Sam]

Mike,

You the Man. Now all I have to do is figure out what I got that I don't need.

Sam :D

[mikenbarb]

Sam, Cash is always good.LOL. Thanks guys.

[Muddy Creek Sam]

That, Sir, is one thing in very short supply. :roll:

Sam :D

[beanflip]

I would like to PIF with a set of 1 inch scope rings (low mount)



Thanks Jim

[rudyc]

Hi Mike,

I'd like your 2 powder funnels and I will PIF with 2, new in the bags, Project Childsafe gun locks.

rudyc

[mikenbarb]

Thanks rudy and their yours! Please PM me your info and I will get em out. Mike

[no_1]

EDIT: Lube will ship to VLY (post #52).

Mike,

I would like the spray case lube and I will PIF with 5 sticks (hollow) of 50/50 lube.

Robert

[mikenbarb]

Its yours no 1, Please PM me your info. Thanks, Mike

[brennemanj83]

Im going to get this rolling and offer for PIF the following items and if you can use any please post what you would like and then PM me your info and I will mail it out,
1- 2 powder funnels. 1 rcbs and 1 MTM. For .22-.45 calibers.(Gone, Taken by rudyc)
2- 400pcs of 9mm brass.
3- 2 Primer flip trays. 1 MTM and 1 RCBS.
4- 1 can Lyman spray case lube.

See, Now wasnt that easy.LOL.



I would like your 400pcs9mm brass and I will PIF 200 Lee 379-250-RF for 38-55 cast from 50/50 ww's and pure lead.

[no_1]

May I suggest that when a member post a PIF and the item is shipped to the new owner, the member edits his post to indicate the item has been PIF'd and not available anymore.

If a member has trouble editing his post to indicate the item is no longer available please notify MikenBarb, myself or another of the Staff Team Members for assistance.

Robert

[arcticbreeze]

I have two Lee 2 cavity molds that i don't use anymore, 401-175-TC and 452-200-SWC. I would like to see them go to someone that will use them. I don't need anything right now unless someone has next weeks winning lotto #'s for FL please. Just pay shipping.

P.S. You don't have to pay shipping if you have those lotto #'s.

Marc

Items pif'ed awaiting info.

[mikenbarb]

Arctic, I would like the 452-200. I will PIF with 100pcs 9mm cast boolits. Saeco #115 with WW alloy.
no 1, Great idea and I changed the post. Mike

[beanflip]

PIF......here is a set of the FAMOUS set of Ruger stickers up for grabs

[wonderwolf]

arcticbreeze I have a great use for that 401-175-TC how much to ship to 45806 and I can get that out to you on tuesday.

I have several things to PIF

Test tube stoppers- great to plug a barrel before you fill with solvent. In various diameters not sure how big or how small I got

Turret press head for a Lee, Its back at the house so I forget how many holes it has (3 or 4) but it came to me with a set of dies. Needed the dies..not the head GONE

RCBS primer pocket cleaner, the wire brush kind I think I have the sm and lg tips for these.

Please email me as I can never seem to keep my PM box cleaned out enough.

[DanWalker]

I Have a Bianchi ranger hush shoulder holster that fits 5-6" bbl revolvers. It's brand new.

[mikenbarb]

Wonderwolf, I would like the Lee Turret plate.
Ah Haa!! I will PIF with 29pcs of once loaded .270 brass. Its all R-P headstamp.

[arcticbreeze]

Mikenbarb and Wonderwolf there yours, just pm me your info and i will send them. Don't worry about the shipping.

[mikenbarb]

Thanks much Arctic, PM sent.

[DanWalker]

Dan,

Will it fit my 6" GP100? Could sure use it if so. Will put up 60 rounds unfired Precission Cartridge 245 gr LRNFP 38-55 (3 boxes of 20). They pay UPS or Fed Ex.

Sam :D
Sam
It should fit, and it is RH draw.
PM me your address and I'll get it in the mail this week.
Anyone got a .490 roundball or 50 cal boolit mould for a ML rifle?

[Muddy Creek Sam]

Dan,

PM Sent and Thank you.

Sam :D

[garandsrus]

Mike, Ken,

Great idea! I was thinking that we should do the same thing but didn't propose it to Ken yet. I would suggest though that a PIF forum be created, with one PIF item per thread. If this works the way I hope it will, the thread is going to be very long!

Thanks again,
John

[garandsrus]

Sam,

I would like:

Will put up 60 rounds unfired Precission Cartridge 245 gr LRNFP 38-55 (3 boxes of 20). They pay UPS or Fed Ex.

I will put up a couple hundred .30 Carbine "as cast" (not sized or lubed) boolits from the group buy mold. I will pay shipping also. ** GONE **

Thanks,
John

[Muddy Creek Sam]

Dan,

I would like:

Will put up 60 rounds unfired Precission Cartridge 245 gr LRNFP 38-55 (3 boxes of 20). They pay UPS or Fed Ex.

Thanks,
John


John,

Pm me with Particulars. Will get them to the shipper, in a few days. Have a 40 mile trip to get there. Local guy is independent and won't take ammo.

Sam :D

[j20owner]

Heh, I've been a part of one of these on another forum as well, and it has gone off swimmingly. I'm going to be watching this closely.

And milkenbarb, I h8 you for taking that 452-200-swc so fast!![smilie=l:

[Lon371]

I digress, item is taken already. Will be back.

I will trow out a mixxed baggy of range brass. has 45-380-40-couple 30-30
If some one wants it.


Lonny

[Marlinreloader]

garandsrus

I would like:


I will put up a couple hundred .30 Carbine "as cast" (not sized or lubed) boolits from the group buy mold. I will pay shipping also.

I will PIF:

I believe them to be a .310 three set dies in .257 roberts.

[mikenbarb]

Hello Lonny, Good to see you here and welcome to Cast Boolits.

[Muddy Creek Sam]

Great thread, But I fear it is being overlooked. It might be a great Idea to seperate it from Sales.

Sam :D

[WickedGoodOutdoors]

How about if we DELETE our Ads when the item is Gone!

Better Housekeeping!

That way it wont end up like my Basement all cobwebs!



Ill throw in a bag of .223 brass. not sure how big Ill have to wiegh it sure anit gonna count it.

[azcoyhunter]

I like this idea of Pay It Forward (I assume that is what this means)

I have some .45 ACP Brass (Multiple reloads)
I have a few 357 brass (Range pickup)
I have a few .40 brass (Range pickup)

[Muddy Creek Sam]

azcoyhunter,

You wouldn't happen to have a dozen Nickel 357 in that batch. Want to make some dummy rounds to put in my belt for storage.

Sam :D

[RayinNH]

I have 12 if you want them Sam. Send me your address...Ray

[Muddy Creek Sam]

Ray,

PM Sent,

Thanks,

Sam :D

[no_1]

PIF = Pay It Forward.
Robert

Dan Walker:

Bianchi ranger hush shoulder holster

I could use that.


Capt Walt
P.O. Box 1585
Saco,Maine 04072


Ill throw in a bag of .223 brass.

How do we do the shipping costs on this idea?



Just how does one pronounce P.I.F. and what does it stand for?

[mikenbarb]

***ATTENTION ALL MEMBERS POSTING ITEMS, Please read my initial post and the rules that apply. Stuff is already being overlooked thats listed in the rules of the opening post and it takes just a minute to read. PIF is a PAY IT FORWARD thread where the members that are so kind to offer items pay the shipping to the member recieving that item unless its worked out prior between members. If you have any questions please pm myself or a moderator and we will be more than happy to answer what we can. This is something new here and we all have to work together to make this a success and so far its looking great! I am going to be working closely with no 1(Robert) on this and we will just have to work out the bugs as they come. If anyone has any suggestions please PM either of us with what your thinking. Thanks much, Mike

[DanWalker]

Sam
It should fit, and it is RH draw.
PM me your address and I'll get it in the mail this week.
Anyone got a .490 roundball or 50 cal boolit mould for a ML rifle?
Holster went in the mail today....
Still looking for RB or conical mould for my 50.

[mpmarty]

if possible either .452 or .309 dies for old style Star lubrisizer

[shooter1970]

I have a friend who had to sell his guns due to a divoce :twisted: I gave him a old 8mm mauser I took on trade If any one has anything for the 8mm that they don't want let me know I would like to get him back shooting and hunting. thanks

[mikenbarb]

shooter, You may want to place that on the want to buy page also.
Always, Always hide your guns at a friends house if getting divorced. It happened to my one close friend also and he lost alot of high end guns to the savage lawyers!

[hornsurgeon]

i'll take the 357 h&i die and pif with 50 lc 223 brass

[mikenbarb]

hornsurgeon, I would like that .223 brass and I will PIF with approx 50 pcs of .44 Special brass. Mixed headstamps and tumbled.
Just counted the .44Spl. brass and I have 68pcs total.:drinks:(Brass is gone to Brenneman.)

[brennemanj83]

hornsurgeon, I would like that .223 brass and I will PIF with approx 50 pcs of .44 Special brass. Mixed headstamps and tumbled.
Just counted the .44Spl. brass and I have 68pcs total.:drinks:

I'll take that 44 spcl brass and PIF with 50 Lee 459-500-R boolits

[mikenbarb]

.44 Brass goes to Brenneman. Thanks.

[mikenbarb]

I still have up for PIF 2 primer flip trays and the .270 brass, 29pcs of RP.:-D

[j20owner]

Ill throw in a bag of .223 brass.



Do you have any idea how many pieces are in the bag?


I'll put up a set of Millett brand 1"scope rings. Weaver style angle-loc's, high.
Rings spoken for.

I'll also put up some 7.62x39 blanks. The thrill of launching inert grenades off of my SKS has passed. These ARE corrosive. I believe East German made, 10/blisterpack. I have 4 packs left.
http://c2.ac-images.myspacecdn.com/images02/83/l_2893888ad28c40458b73c65e144ec325.jpg

I'd really like either 452 or 358 diameter molds if anyone has one or two. :-D

[GSPKurt]

I have a Lee Perfect Powder Measure if anyone needs one.

[garandsrus]

Hi,

I would like:
I'll put up a set of Millett brand 1"scope rings. Weaver style angle-loc's, high.

I will put up 100 6.5mm cast boolits sized to .268, and gas checked. ** GONE **

John

[no_1]

Fellow Members,

This is doing very well. I have seen some really good stuff come and go so far. Please remember to keep it in the spirit of doing this the way it was designed by MikenBarb: If you have something, offer it. If you see something listed, claim it but offer something in replacement.
If you have something you wish to trade for something else in particular then it should be listed in the general Swapping & Selling section.

Robert

[Lon371]

***Gone to no-1******************************I



digress I am way to slow and cant read. Oh well while I am here I will offer up below.

T/C contender(original) wood grip has the aluminum cap with a cougar head.TAKEN BY "NO1"

Lonny
Lon371@gmail.com

[no_1]

EDIT: Chunky Monkey gets these.

I would like the "I will put up a T/C contender wood grip has the aluminum cap with a cougar head" and will PIF 4 sticks of LARS BAC red lube.

Robert

[Idaho_Elk_Huntr]

I would like please.

I will put up a T/C contender wood grip has the aluminum cap with a cougar head.

Lonny
Lon371@gmail.com

Someone already beat you to it

[Lon371]

no 1 Its yours send me your info

Lonny

[Westwindmike]

garandsrus,
I would like the 100 6.5mm cast boolits sized to .268, and gas checked.

I will PIF 150 .38 special cases, mixed headstamp, tumbled and clean.

Westwindmike

[no_1]

They are yours. PM me your shippin info.

Robert

I would like the 4 sticks of LARS BAC red! I will PIF 2 unopened bottles of Lee Tumble lube.

[Chunky Monkey]

They are yours. PM me your shippin info.

Robert

PM Sent

I put 2 unopened bottles of Lee liquid alox up for PIF!

[rudyc]

Hello Chunky Monkey,

I'd like: 2 unopened bottles of Lee liquid alox up for PIF!

I will PIF with 50 once fired .30-30 brass. ----- (PIF to brennemanj83)


rudyc

[brennemanj83]

PM Sent

I put 2 unopened bottles of Lee liquid alox up for PIF!

I'll take that alox and PIF w/ 20 300wsm nickle cases

[brennemanj83]

to late.

[brennemanj83]

Hello Chunky Monkey,

I'd like: 2 unopened bottles of Lee liquid alox up for PIF!

I will PIF with 50 once fired .30-30 brass.

rudyc

i'll take the 30-30 brass then and PIF with all t 300wsm brass I have........Have to count them

[NSP64]

you got to be quick:Fire:

[brennemanj83]

My PC had Brain Fart

[RANGER RICK]

Old style Star lubrisizer die and "plug" that pushed boolit through. Here are some photos. PM me if you want it.


I will take the 429 Star die if it has not been spoken for and I will replace it with ??
Got to go to my reloading room !!!!!

RR

[j20owner]

Hi,

I would like:
I'll put up a set of Millett brand 1"scope rings. Weaver style angle-loc's, high.


John

I reply'd to your PM. They are on their way. I'm still on the lookout!

[Chunky Monkey]

PM Sent

I put 2 unopened bottles of Lee liquid alox up for PIF!

Hello Chunky Monkey,

I'd like: 2 unopened bottles of Lee liquid alox up for PIF!

I will PIF with 50 once fired .30-30 brass.

rudyc


Alox goes to rudyc. PM me your shipping info!

[wonderwolf]

mikenbarb the lee plate is on its way to you as of yesterday! It was a 4 hole so I hope you can use it. I've never seen one of those presses work so I'm just guessing the 3 & 4 hole heads just indext by hand? and you can use both on the same press?

[manleyjt]

Marlinreloader,

I will take you 310 257 roberts 3 die set, pm sent.

I offer up a Sure Jet 12 guage single stage reloader. Has shot and powder measure. I do not have books so you will have to find info on your own.
The press was sold by lachmiller is all the info I have. SPF to txbirdman

[txbirdman]

I'll take that 12ga. reloader. Offering Pacmayr small presentation grips for square butt N-frame S&W and Lee single cavity 190 gr. SWC 45 acp mould. Mould to Westwindmike.

Grips still up for grabs.

[Westwindmike]

txbirdman,
I will take the Lee single cavity 190 gr SWC 45acp mould.

I will PIF a Ruger factory Mini 14, 5 round magazine. rmb721 gets it.
Mike

[rmb721]

Westwindmike: I would like to have the Ruger Mini-14, 5 round magazine.

I will PIF with a Hunter brown leather holster for a ruger semi-auto 22 with a 5 1/2 or 6" standard barrel. Gone to tdd4570

[GSPKurt]

GPS Kurt

I will take:

I have a Lee Perfect Powder Measure if anyone needs one.

And PIF some C&H shootgun reloader parts or dies. I still have available the .310 dies for .257 Roberts. Three die set.

You got it. I can't send it out until next week, though. I'm in South Carolina right now.[smilie=s:

[rem700-3]

Each pif item should be a seperate listing instead of going through pages of stuff that is allready gone.

[mikenbarb]

Thanks much Wonderwolf. Yes, They have to be indexed by hand.:-D

[mikenbarb]

***Attention posters of items, Please mark the items that are taken so members know its gone and no longer available. It will make life MUCH easier for all. Thanks much, Mike

[WickedGoodOutdoors]

If the brass is still available I'll take it , please.

I'll put up a black leather right hand Safariland model 2955/2197 holster for a 92F DA
DA only

This one is new, just dusty:-D


Mike You can have the .223. Send me your shipping address.

Capt Walt

Just how does one get a Moose into a Canoe?

http://2.bp.blogspot.com/_4OYGjUrdllo/SUZiH7q-tBI/AAAAAAAANjg/5OOxEDljfz0/s400/moose.gif

[Chunky Monkey]

Hello Chunky Monkey,

I'd like: 2 unopened bottles of Lee liquid alox up for PIF!

I will PIF with 50 once fired .30-30 brass. ----- (PIF to brennemanj83)


rudyc

Boy this thread dried up fast. I'll have to see what I got to put up here.

By the way rudyc the alox went to the post office this morning!

[mikenbarb]

Wonderwolf, got the plate and thanks much.:drinks:

[mikenbarb]

Im digging out some more goodies tommorow so keep watching.:-D
I still have the primer flip trays and the .270 brass.

[brennemanj83]

I still have the 38-55 bullets and the 45-70 bullets for PIF

[Nefarious Cohort]

I will put up a couple hundred .30 Carbine "as cast" (not sized or lubed) boolits from the group buy mold. I will pay shipping also.


If these are still available I would like them


And I will PIF with a couple hundred once fired 45acp brass in Frankford Arsenal blue plastic flip top ammo boxes

Thanks!
Nefarious

[cattleskinner]

I will take the 45 acp brass in the blue cases. And I will pay it forward with a used single cavity Lee 130 gr. 7mm mold.

Hornsurgeon was quicker than the rest

~~Amos

[Marlinreloader]

Sorry
Nefarious Cohort

The 30 carbine bollits were already taken and were delivered today.
Thanks
Marlinreloader

[hornsurgeon]

i'll take the lee 7mm mold from cattleskinner. i'll pif with100 223 cases. gone to rmb721

[rmb721]

hornsurgeon: I would like to have the 223 cases.

I will PIF with 100, 311041 cast bullets sized to .309 with gas checks.-- gone to Westwindmike

I still have available a Hunter, brown leather RH holster for a Ruger 22 semi-auto for up to a 6 inch standard barrel. gone to tdd4570

Please send PM in addition to posting.

[JSnover]

mikenbarb the lee plate is on its way to you as of yesterday! It was a 4 hole so I hope you can use it. I've never seen one of those presses work so I'm just guessing the 3 & 4 hole heads just indext by hand? and you can use both on the same press?

Depends on when the press was made. Mine is an older one and the four-hole plates won't work.

I have two of these to PIF, new-in-box (got them in trade with some other stuff). Lee part # 34307 90269. Contact Lee customer service to make sure they'll work in your press.

PIF'd to Rudy!

[joeb33050]

Mod 34 and 35 parts list, instructions maint, specs
Same for Mod 66
"Safety and instructional materials for your S&W Firearm"
"S&W revolvers, safety and instruction manual"
don't want to throw them away.
pm please
joe b.

[rudyc]

Hello JSnover,

I'll take these:

Lee 4-hole turret plates
Quote:
Originally Posted by wonderwolf View Post
mikenbarb the lee plate is on its way to you as of yesterday! It was a 4 hole so I hope you can use it. I've never seen one of those presses work so I'm just guessing the 3 & 4 hole heads just indext by hand? and you can use both on the same press?
Depends on when the press was made. Mine is an older one and the four-hole plates won't work.

I have two of these to PIF, new-in-box (got them in trade with some other stuff). Lee part # 34307 90269. Contact Lee customer service to make sure they'll work in your press.

and PIF with .45 ACP brass

rudyc

[JSnover]

Hello JSnover,

I'll take these:

Lee 4-hole turret plates
Quote:


and PIF with .45 ACP brass

rudyc

It's a done deal!

[Chunky Monkey]

Hello JSnover,

I'll take these:

Lee 4-hole turret plates
Quote:
Originally Posted by wonderwolf View Post
mikenbarb the lee plate is on its way to you as of yesterday! It was a 4 hole so I hope you can use it. I've never seen one of those presses work so I'm just guessing the 3 & 4 hole heads just indext by hand? and you can use both on the same press?
Depends on when the press was made. Mine is an older one and the four-hole plates won't work.

I have two of these to PIF, new-in-box (got them in trade with some other stuff). Lee part # 34307 90269. Contact Lee customer service to make sure they'll work in your press.

and PIF with .45 ACP brass

rudyc


Rudyc I'll take the 45 acp brass and PIT 2 sticks of Lyman super moly lube.

[Westwindmike]

rmb721,
I would like the 100, 311041 cast bullets sized to .309 with gas checks.

I will PIF a bag of .40 S&W brass. Will have to count them, but is around 100.

Mike

[rmb721]

Westwindmike: the 311041 bullets are yours.

I still have available a Hunter, brown leather RH holster for a Ruger 22 semi-auto for up to a 6 inch standard barrel. Gone to tdd4570

Please send PM with address in addition to posting.

[rudyc]

Chunky Monkey,

"Rudyc I'll take the 45 acp brass and PIT 2 sticks of Lyman super moly lube."

It's yours, please PM with your shipping info.


rudyc

[Chunky Monkey]

Chunky Monkey,

"Rudyc I'll take the 45 acp brass and PIT 2 sticks of Lyman super moly lube."

It's yours


rudyc


Thanks rudyc!!

I meant I would PIF 2 sticks of lyman moly lube (these are gone). Not sure what PIT is?

[brennemanj83]

Chunky Monkey,

"Rudyc I'll take the 45 acp brass and PIT 2 sticks of Lyman super moly lube."

It's yours, please PM with your shipping info.


rudyc

I'll take the 2 sticks of lyman moly lube and PIF with 50 429-255-SWC cast with WW alloy.

[rudyc]

Hello Brennemanj83
I think that Chunky Monkey has the lube, please PM him. I had the .45 brass.

rudyc

[brennemanj83]

ok sorry

[Chunky Monkey]

Hello Brennemanj83
I think that Chunky Monkey has the lube, please PM him. I had the .45 brass.

rudyc

ok sorry


Yep, PM's sent all square, I think!:-?

[j20owner]

Ok, I'm cornfuzzled. What's still available?

[Chunky Monkey]

I'll take the 2 sticks of lyman moly lube and PIF with 50 429-255-SWC cast with WW alloy.

I think this is what's available^^. Someone correct me if I'm wrong. I still gotta dig around, I know I got some stuff I no longer need.

[j20owner]

Everything I'd like to have gets snagged while I'm out of town or at work. :( Poor me. I'm sure something will show up.

[Idaho_Elk_Huntr]

That is why I dont play, Dont know if it will work out here like most places but to me it seems like a swapathon and its almost alway the same few people

[mikenbarb]

I still have available 2 primer flip trays, .270 brass and im adding 2 tubes of RCBS case lube. The good old type in the plastic tubes.

[no_1]

This has been going very good. No complaints from those that have PIF yet. I have received both items I ask for and have been notified that one of the recipients of the items I sent has receive it.

I ask again that all who have shipped the items they have posted please edit your post to indicate the items are no longer available. If you cannot edit your post then please send a PM to me or any other member of the Staff Member Team and they will help. Please reference the post # of your post to make it easier on us.

Robert

[Marlinreloader]

Wonderwolf.

I left you a PM also. The 310 dies went in the mail today.
Enjoy.

Marlinreloader

[illhunter]

I still have the 38-55 bullets and the 45-70 bullets for PIF

I will take the bullets if they are still available.

[Marlinreloader]

I will take the bullets if they are still available.

Just an FYI. from the rules. When you ask for an item a PIF should be given in return.

I believe the bullets available are from two Different PIF'S. Thus it would take two different PIF'S.

Just want to keep this going and fair. You can see there are others that are already concerened these threads get turned into take take and no give.
I think it's great and helps me help others that I teach. I personally would like to see it work.

Peace to all
Thanks
Marlinreloader

[Safeshot]

Mikenbarb,

Your PM folder is full. It needs to be cleared before you can receive any more PM's.

Safeshot

[brennemanj83]

I will take the bullets if they are still available.

They are two seperate PIFS

[wonderwolf]

And PIF some C&H shootgun reloader parts or dies. I still have available the .310 dies for .257 Roberts. Three die set. Gone to ManleyJT

310 dies? I was interested in seeing what the C&H reloader stuff was. I'll see what all I can scrounge up and get in the mail today for you. I was further confused by your PM saying you had sent me stuff. I havn't given you an address yet I think.

[Marlinreloader]

310 dies? I was interested in seeing what the C&H reloader stuff was. I'll see what all I can scrounge up and get in the mail today for you. I was further confused by your PM saying you had sent me stuff. I havn't given you an address yet I think.

Sent PM to wrong person.
Should have went to Manley. All fixed now.
PM sent to Wonderwolf and Manley
Marlinreloader

[tdd4570]

rmb721

I'll take it (the holster) if it is still available.

"I still have available a Hunter, brown leather RH holster for a Ruger 22 semi-auto for up to a 6 inch standard barrel."

I'll PIF with a bag of mixed hs 40 S&W @ 200.

Thanks

Dave

[rmb721]

tdd4570: The holster is yours.

PM me with your name and address.

[arcticbreeze]

Hey mikenbarb and wonderwolf

Did you guys get the molds and I am hoping I sent the correct one to each of you and didn't switch them by mistake. I think I am getting senile.:confused::confused::confused:

[mikenbarb]

Artic, Got it and thanks much. I thought I replied but im getting senile I guess.LOL. Thanks again.:drinks:

[DBrown]

I'll take the larger of the flip trays and PIF with black rt hand holster for SAA w/4.75 bbl

[mikenbarb]

I will send you both of them. Just shoot me a PM with your info. Thanks, Mike
PS- Please post members name when replying about an item and then send a pm following the reply with your info and item wanted.:drinks:

[Muddy Creek Sam]

Mikenbarb,

Sure would be easier to keep up if this was a sub board will individual Posts for Items so we could keep track of what was taken and still available. Just MHO.

Sam :D

[mikenbarb]

Sam, That may be the answer and I will work on it with the BIC. Thanks.

[rem700-3]

darn I shoulda thought of that a hundred post ago

[mikenbarb]

Its always been a thought but wanted to make sure this would fly first. I like the idea but its up to the boss man if he wants to do it. Im keeping all my digits crossed.LOL.:drinks:
I want to thank everyone for all the great suggestions and all the great items you all have offered here and I hope this continues to be a success. Thats what good people are all about with showing their kindness and this shows that there are alot of great people here that you wont find anywhere else. Thanks again everyone, Mike.

[wonderwolf]

Hey mikenbarb and wonderwolf

Did you guys get the molds and I am hoping I sent the correct one to each of you and didn't switch them by mistake. I think I am getting senile.:confused::confused::confused:

LOL I dunno, I had you ship it to my home address as the mail here at school can be iffy and things in the city tend to walk off even in the middle of the day. Dad says it looks about what I said it should be so I think its right lol :drinks: Thanks again!

[freedom475]

I have a roll of nylon harness lacing, also known as artificial sinew. Can be split down into thinner pieces for use.

I could sure use this sinew.

I have some 54 cal plastic sabots to put up.

[tdd4570]

rmb721

I got the holster in the mail today.

Thanks

Dave

[mikenbarb]

hornsurgeon, Got the brass. Thanks much. Gonna load some tommorow with a few H&G #11's.:drinks:

[manleyjt]

Marlinreloader,

Dies arrived today. Thanks a bunch.

[DBrown]

Mikenbarb
Sent you PM with name and addressfor flip trays! Thanks!
Still have handmade black LH holster for 4.75 SAA

[mikenbarb]

Got it and their shipping in a day or two.

[oldhickory]

One sweade inside the pants holster for lg frame auto, (short bbl) looks new, maker unknown, has riveted belt clip. RH

One LEFT HAND BIANCHI black nylon holster for lg frame auto w/adjustable thumb strap and matching double mag pouch, (single stack). Used condition on both holster and mag pouch.


A full size M1911A1 will fit in either, but the inside pants holster is about an inch too short, Combat Commander maybe?...

Send me a PM and I'll slip em into a flat rate envelope and get them on their way if you can use em.

[Stick_man]

rmb721

I'll take it (the holster) if it is still available.

"I still have available a Hunter, brown leather RH holster for a Ruger 22 semi-auto for up to a 6 inch standard barrel."

I'll PIF with a bag of mixed hs 40 S&W @ 200.

Thanks

Dave

tdd, I'd be happy to take the .40S&W brass if still available. I'll pif with a box of 250Savage brass. I believe they are once fired, but not 100% sure. R-P headstamp.

[garandsrus]

Old Hickory,

If it's still available, I would like:
One LEFT HAND BIANCHI black nylon holster for lg frame auto w/adjustable thumb strap and matching double mag pouch, (single stack). Used condition on both holster and mag pouch.

I will PIF with 50 (or 100 if I have them) sized (.379), gas checked, and lubed Lyman 375449 boolits.

Thanks,
John

[oldhickory]

Old Hickory,

If it's still available, I would like:
One LEFT HAND BIANCHI black nylon holster for lg frame auto w/adjustable thumb strap and matching double mag pouch, (single stack). Used condition on both holster and mag pouch.

I will PIF with 50 (or 100 if I have them) sized (.379), gas checked, and lubed Lyman 375449 boolits.

Thanks,
John


Don't worry about the boolits, I'm just glad someone can use the holster. PM me with shipping address and it's yours.

[delmar]

I have 20 pieces of .40 S&W and 35 of 357 but it seems like it would cost me more to ship it than they would be worth. What is the cheapest way to ship, and how many pieces of brass does it take to be worth the cost of shipping? My guess is it won't be worth it till I pick up brass a few more times.

[Marlinreloader]

Garandsrus,

I will take
I will PIF with 50 (or 100 if I have them) sized (.379), gas checked, and lubed Lyman 375449 boolits.

I will PIF

New non-treated walnut media for tumblers.

[xd shooter]

Marlinreloader, I would like the
New non-treated walnut media for tumblers.

I will PIF
1 Fobus holster for a S&W M&P. It says for a .40 but I know a 9mm fits also.

Holster goes to Lead slead.

[WickedGoodOutdoors]

Garandsrus

New non-treated walnut media for tumblers.


Finally something I can use. Walnuts! Yum!

my address is P.O. Box 1585
Saco,Maine 04072

The holdster would have been just the thing but I slept too late I guess. (Confusious say:He who Snooze, Loose.)

I had previously PIFfed some .223 that has been spoken for. So Ill PIF some 9mm/.380 brass.

m.chalmers . Let me know if you want the 9mm with the .223 Im sending you. not much but let me dig around and Ill find something else .:veryconfu

[tdd4570]

Stick Man

40 S&W brass is yours.

Dave

[xd shooter]

NEWENGLANDCHARTERS You have a PM Marlinrealoader too.

[Stick_man]

Marlinreloader, I would like the
New non-treated walnut media for tumblers.

I will PIF
1 Fobus holster for a S&W M&P. It says for a .40 but I know a 9mm fits also.

XD, if that will work for a southpaw and a FS (not compact model), I'll take it. I'll post a PIF this evening after I get home.

[xd shooter]

The holster is right hand.

[DanWalker]

I'll take the 380 brass. I allready PIF'd a holster, but will put up both 9mm brass and 40 S&W brass to keep this thing rolling.
100pcs of each is what I have. it's range pickup brass and mixed headstamp. It's been cleaned in walnut media in avibratory cleaner.

[Triggerhappy]

OldHickory,

I'd like the top holster you have. I'll PIF a couple boxes of .338 Jacketed Bullets. Will have to go dig the boxes out to post exactly what they are. I think they're both full. Post in a few.

Please let me know if you still have it.

TH

[Jaybird62]

I'll PIF with:

14 once-fired .370 Sako Magnum cases. (Gone to BrennemanJ83)

These are for your muzzleloader with J-word or cast projectiles:
50 .45 Muzzleloader Magnum sabots for .357 bullets
50 .54 Muzzleloader Magnum sabots for .429 bullets

40 Warren "Ready to Shoot" .54 saboted slugs (225 gr. .45 cal Warren pure lead bullets).

Don't see anything I need yet, but it looked like so much fun I decided I'd "bank" this for when something nifty pops up.

[brennemanj83]

I'll PIF with:

14 once-fired .370 Sako Magnum cases.

These are for your muzzleloader with J-word or cast projectiles:
50 .45 Muzzleloader Magnum sabots for .357 bullets
50 .54 Muzzleloader Magnum sabots for .429 bullets

40 Warren "Ready to Shoot" .54 saboted slugs (225 gr. .45 cal Warren pure lead bullets).

Don't see anything I need yet, but it looked like so much fun I decided I'd "bank" this for when something nifty pops up.


I'll take the 370 sako brass and PIF with 100 9mm brass

[WickedGoodOutdoors]

OldHickory,

I'll PIF a couple boxes of .338 Jacketed Bullets. Will have to go dig the boxes out to post exactly what they are. I think they're both full. Post in a few.

TH

CAN I HAVE the .338 Buletts to stuff dowm my .340 weatherby Mag


Ill PIF aDozzen Maine Blueberry Bush roots


Anybody have some Gape Vine Scions that the woul would like to harden in the latatudes of Maine?

[oldhickory]

OldHickory,

I'd like the top holster you have. I'll PIF a couple boxes of .338 Jacketed Bullets. Will have to go dig the boxes out to post exactly what they are. I think they're both full. Post in a few.

Please let me know if you still have it.

TH


I'm afraid both holsters are on their way to new homes already Triggerhappy, they went quick.

[lead slead]

xd i will take the holster and will pif with some 9mm and 357 sig brass.

[Stick_man]

tdd4570 Received the brass today. Thanks. They look great.

[xd shooter]

xd i will take the holster and will pif with some 9mm and 357 sig brass.

It is yours. Should go out today.

[rmb721]

lead slead: I would like to have the 9mm brass.

I will PIF with 175+ Ideal 7mm gas checks. claimed by hornsurgeon-shipped 3-19-09

When claiming gas checks, please send a PM in addition to posting.

[hornsurgeon]

i'll take the 7mm checks, and pif with a brand new rcbs 2 cavity sprue plate. this is the thick one.

[rmb721]

hornsurgeon: The gas checks are yours. shipped 3-19-09

[m.chalmers]

How about if we DELETE our Ads when the item is Gone!


Ill throw in a bag of .223 brass. not sure how big Ill have to wiegh it sure anit gonna count it.

If the brass is still available I'll take it , please.

I'll put up a black leather right hand Safariland model 2955/2197 holster for a 92F DA
DA only

This one is new, just dusty:-D

Lets get this thread moving again. gone to 45nut PM me if anybody needs one, I'll start a list. I'll find a few more
I'll also put up a retro TM 9-1005-249-10 Operator's Manual for
Rifle, 5.56-MM, M16 (1005-00-856-6885)
Rifle, 5.56-MM, M16A1 (1005-00-073-9421)
Dated Febuary 1985 (cover is marked as:This copy is a reprint which includes current pages from Changes 1 and 2.)

This is a "mint" USGI Op Manual (-10) . Who needs one?

[hornsurgeon]

rmb721 - got the 7mm gas checks today - my kid thanks you!

[Lon371]

Originally Posted by NEWENGLANDCHARTERS
How about if we DELETE our Ads when the item is Gone!

Not a good Idea. Like myself, people pay it forward first (post#63 & post#31) and have not taken anything. Then it would make me look like an idiot claiming someones stuff and saying I already PIF. If people would go back and mark their post heading, it would save some reading. But hey reading is good;]

Lonny

[rmb721]

hornsurgeon: I would like to have the RCBS double cavity sprue plate if still available.

I will PIF with a Lyman "J" series #2 shellholder for Lyman All-American (243, 308, 30/06 size cases)--claimed by dpaultx

Also a set of one inch quick release sling swivels.

In addition to posting, please send a PM with address.

lead slead: I received the brass today. Thank you.

[45nut]

Mike, I can use the manual offered and will PIF with a new in package Jennings J-25 magazine.

[dpaultx]

rmb721 . . .

I could really use that "Lyman "J" series #2 shellholder for Lyman All-American "

I will PIF with a Lyman 7/8"x14 Adapter Sleeve (Lyman #7392036). - - - claimed by 1911sw45

This is the threaded adapter sleeve that allows use of Lyman 310 dies and/or the Lyman #55 powder measure in standard 7/8"x14 threaded presses. It's brand new in the original (old) Lyman package.

All good . . . Doug

[rmb721]

dpaultx: The shellholder is yours. PM me your address.

[1911sw45]

dpaultx I will take the Lyman 7/8"x14 Adapter Sleeve (Lyman #7392036) and

I will PIF Lee Auto-Prime shell holders #2 and #4

[dpaultx]

1911sw45 . . .

The Lyman 7/8"x14 Adapter Sleeve (Lyman #7392036) is yours. PM me with your shipping info. - - - SHIPPED 03/26/09

(Wish you had a Lee Auto-Prime shell holder #19)

All good . . . Doug

[dpaultx]

rmb721 . . . The shell holder came in the mail today. Looks great.

Thanks again . . . Doug

dpaultx: The shellholder is yours. PM me your address.

[Coyote Roper]

I still have the 38-55 bullets and the 45-70 bullets for PIF

I will take the 38-55 Bullets (200) Brennemenj83. Will send PM with my email. CR

I will PIF a Bianchi Nylon Right Hand (belt) holster for Berreta M92. CLAIMED BY !! rmb721 !!

[1911sw45]

dpaultx,

I got the Lyman 7/8"x14 Adapter Sleeve (Lyman #7392036) today in the mail. Thanks!!!

I still have these to PIF Lee Auto-Prime shell holders #2 and #4

1911sw45
Adam

[rmb721]

Coyote Roper: I would like to have the Bianchi Nylon holster.

I will PIF with a Hunter brown leather holster for a Ruger semi-auto 22 with a 4 5/8 standard barrel.--claimed by waksupi

I also still have available a set of new one inch quick release sling swivels.


Send a PM in addition to posting.

[waksupi]

I will PIF with a Hunter brown leather holster for a Ruger semi-auto 22 with a 4 5/8 standard barrel.
Send a PM in addition to posting.

I would like the holster.

Will PIF with two books, Bow Hunters Guide, by Russell Tinsley, and Bowhunter's Digest, second edition.

[rmb721]

waksupi: The holster is yours. shipped 3-31-09

I still have available a new set of one inch quick release sling swivels. claimed by freedom475

[mikenbarb]

Im going to PIF 75pcs of .440dia round balls if anyone can use them. Their soft like pure lead with a spru.

[brennemanj83]

Im going to PIF 75pcs of .440dia round balls if anyone can use them. Their soft like pure lead with a spru.

I'll take these and PIF with 100 .390'' roundballs.

[mikenbarb]

.440 RB's in pif post #181 go to Brenneman. They will ship tommorow or Monday. Thanks, Mike

[freedom475]

I also still have available a set of new one inch quick release sling swivels.


Send a PM in addition to posting.

I could use these swivels... PM sent Got the swivels, THANK YOU!!

I will put up a #11 TC Replacement nipple for a Scout carbine/pistol #7231... brand new still in blister pack.NEWENGLANDCHARTERS the nipple is yours Thanks

[WickedGoodOutdoors]

I'll take these 100 .390'' roundballs. and the #11 TC Replacement nipple for a Scout carbine/pistol #7231... brand new still in blister pack.

Since its a tokindubblepif Ill PIF with something of higher value.

Here is my PIF:

One of these:

Plastic Containers filled with Desiccant.


Changes from Blue to pink when it gets wet. Air Dryers. Have 3/8" threaded fittings on Alum end caps and 1/4" Barb connectors on end of tube.
http://i197.photobucket.com/albums/aa282/Newenglandcharters/desicant1.jpg

[coyotebait]

Newenglandcharters
I will take the [B]blue berry bush roots[B]if you still have them.
I will PIF 120 pc 30-06 LC 67-69 once fired brass shot in my DCM M1 Garand.

30-06 brass is taken

[WickedGoodOutdoors]

Newenglandcharters
I will take the [b]blue berry bush roots[b]if you still have them.
I will PIF 120 pc 30-06 LC 67-69 once fired brass shot in my DCM M1 Garand.

Hi Wayne. OK you got them .They need a couple more weeks for the ground to thaw.

Walt

[rmb721]

freedom475: The sling swivels are yours.---shipped 4-6-09

Coyote Roper: The holster arrived yesterday. Thank you.

[Coyote Roper]

Glad to hear it rmb721.

Thanks
CR

[mikenbarb]

Ok, Got another item to PIF.
I have a NIP Traditions 1" scope ring set that clamp on to Weaver style bases. Their new never used and if you can use them please reply with a I will take it and pm me your info. Thanks, Mike.
***Gone to NewEnglandCharters. They will ship by Friday.***

[selmerfan]

Newenglandcharters
I will take the [B]blue berry bush roots[B]if you still have them.
I will PIF 120 pc 30-06 LC 67-69 once fired brass shot in my DCM M1 Garand.
I'd like these if still available. Let me check the bench to see what to PIF with. PM sent.
Selmerfan

[coyotebait]

selmerfan
TQuote:
Originally Posted by coyotebait
Newenglandcharters
I will take the [b]blue berry bush roots[b]if you still have them.
I will PIF 120 pc 30-06 LC 67-69 once fired brass shot in my DCM M1 Garand.

I'd like these if still available. Let me check the bench to see what to PIF with. PM sent.

Selmerfan
The 30-06 brass is yours. PM recieved. PM sent.
coyotebait

[selmerfan]

I'll PIF with a firing pin/shroud/spring assembly for a short action M700. It is a j-lock version, blued.
Selmerfan

[mikenbarb]

Scope rings are gone to NewEnglandCharters. Thanks.

[Blackhawk]

I've got a HKS Speed Loader for a 9-shot 22LR (HKS 22HR). If you need it, send me a PM, I'll get it in the mail.

[mikenbarb]

Welcome Blackhawk. Thanks for joining in on the fun.:drinks:

[Rick459]

Mike, I can use the manual offered and will PIF with a new in package Jennings J-25 magazine.

45nut i can use the Jenning's J-25 magazine if still available. and i will PIF with 39 pulled down primed never fired 7 Mag cases
http://i123.photobucket.com/albums/o301/rick4570/Picture037.jpg

Rick

[txbirdman]

Rick,

I'll take those 7mag cases if still available. I'll put up a RCBS .375 lube/sizing die.

[Jake McCracken]

I have a Lee Powder scale gently used...

Claimed by Lon371

[Lon371]

Jake McCracken

I have a Lee Powder scale gently used

I will take it please.
I have pre paid it forward with a contender grip and still have some mixed brass listed
(post#63 & post#31)

Lonny

[Jake McCracken]

Jake McCracken



I will take it please.
I have pre paid it forward with a contender grip and still have some mixed brass listed
(post#63 & post#31)

Lonny

It's yours... PM Sent

[Jake McCracken]

I have 12 mauser striper clips, free to good home!

Gone to MT Gianni

[Jaybird62]

TXBirdman:
I'll take the .375 RCBS size die. PM sent w/ address. I PIFfed some brass in an earlier post that's already gone to a new home. I still have the ML sabot rounds.

[MT Gianni]

Jake I will take the Mauser strips and start a new item tonight. Gianni.

[Jake McCracken]

Jake I will take the Mauser strips and start a new item tonight. Gianni.

They're yours... PM Sent!

[Storydude]

If anyone has some once fired Remington hulls, I could really use them. Just started reloading for shotgun and I have 2 kids that want to start trap this year. Yay, another caliber to reload for!


I can PIF with a box or 2 of IMI 9mm Subgun ammo. I wouldn't fire it in anything NOT +p+ rated, but it's 9MM 115G FMJ's if you want to break it down. IIRC, 30 Rnds per box.

[Stick_man]

Storydude, which Remmy hulls are you looking for? Also, 12ga or 20ga? High brass or low brass or ???

[Storydude]

Any of the new Remington hulls (STS, RXP, Gunclub) in 12G, high or low brass it's all the same to me :)

I can also use some 12G Win AA hulls if you have any...:)

[Jake McCracken]

If anyone has some once fired Remington hulls, I could really use them. Just started reloading for shotgun and I have 2 kids that want to start trap this year. Yay, another caliber to reload for!


I can PIF with a box or 2 of IMI 9mm Subgun ammo. I wouldn't fire it in anything NOT +p+ rated, but it's 9MM 115G FMJ's if you want to break it down. IIRC, 30 Rnds per box.

I'll take the 9mm ammo, please!?

[Storydude]

It's yours. :drinks:

[mikenbarb]

Storydude, I can send you some AA hulls and wads for the kids. Their ALOT better than Remingtons. Pm me your info and I will mail them out.

[mikenbarb]

No idea where I got em and I dont have horses.
Two vintage horse books for PIF. First is "Horseback riding for boys and girls" Copyright 1963. And second is "Horsemanship, First steps" Copyright 1965.
They may even have some value to them but who knows???

[MT Gianni]

44 count Sierra Pro Hunter 6.5 cal 120 gr bullets. Not enough to keep and develop a load for but if you shoot this cal. it works for you. Gianni

Gone to RMB

[Jake McCracken]

Kyle623 gets the RAM

I'll take the 9mm ammo, please!?

I have 1 gig of DDR2 LAPTOP ram (2 512mb sticks) Free to good home!

Not sure on the specifics, I'll have to pull them out and update this later.
I pulled them out of my current laptop (about 1yr old) to put in 2 gig...

[kyle623]

I'll take the ram chips and pif with 100 9mm mixed hs brass.

[rmb721]

Mt Gianni: I would like to have the Sierra 6.5 bullets.

I will PIF with two Traditions Straight Line Cappers for #10 and #11 caps, new in the packs.--Claimed by NEWENGLANDCHARTERS

kyle623: I would like to have the 9mm brass.

I will PIF with a TC 209 flex capper for 209 primers, new in the pack.--claimed by NEWENGLANDCHARTERS

Please send a PM in addition to posting.

[kyle623]

brass goes to rmb

[WickedGoodOutdoors]

Ill take the Cappers. been using me fingers

Traditions Straight Line Cappers for #10 and #11 caps, new in the packs. TC 209 flex capper for 209 primers, new in the pack.





I will PIF with a big handfull of M1 stripper Clips. How ever many there are in a typical tuna can?anyone know? I have never counted them. I remove them for use with my bolt action?



http://www.helstongunsmiths.com/shop/images/Picture-087.jpg



And I'll throw in a Brand New Black US Army Beret.. Size wicked Small that will only fit a child or small french girl . Why did Unckle Sam make these? Must have been to "Stimulate the Economey?"
http://www.specialforces.com/store/customimages/catalog/details/R4918.jpg

[j20owner]

Newenglandcharters, do you mean the 'enbloc' clips that are used to load and shoot the M1 Garand? Or something else?

Do you have any idea how many pieces are in the bag?


I'll put up a set of Millett brand 1"scope rings. Weaver style angle-loc's, high.
Rings spoken for.

I'll also put up some 7.62x39 blanks. The thrill of launching inert grenades off of my SKS has passed. These ARE corrosive. I believe East German made, 10/blisterpack. I have 4 packs left.
http://c2.ac-images.myspacecdn.com/images02/83/l_2893888ad28c40458b73c65e144ec325.jpg

I'd really like either 452 or 358 diameter molds if anyone has one or two. :-D


Updated my previous post. Sending 3 packs of blanks to Jake McCracken.

[Jake McCracken]

SNIP...

And I'll throw in a Brand New Black US Army Beret.. Size wicked Small that will only fit a child or small french girl . Why did Unckle Sam make these? Must have been to "Stimulate the Economey?"
http://www.specialforces.com/store/customimages/catalog/details/R4918.jpg


I would like the Beret for my son.


http://mysite.verizon.net/redknightspa24/5.jpg


I will get something up soon. (although, I think I'm still ahead on PIF's)

[Chunky Monkey]

I would like the Beret for my son.


http://mysite.verizon.net/redknightspa24/5.jpg


I will get something up soon. (although, I think I'm still ahead on PIF's)

Damn Jake I didn't know your son has a Thompson! :shock: Thats a great pic! Do you guys do re-enactments?

[Jake McCracken]

Damn Jake I didn't know your son has a Thompson! :shock: Thats a great pic! Do you guys do re-enactments?

That Thompson is actually a "de mil'd" dummy, it (and all of the vehicles) belong to the father of one of the leaders in our scout troop. We camp at his place during the summer. He lets the boys play with a bunch of stuff. He and the leaders drive them around in the vehicles.

I could only dream of having the cash and gear it takes to re-enact!

I'll put up a few more pics for ya when I find them.

In the mean time, I have Mitutoyo thread gage (model 188-111) 4 to 42 tpi. free to good home!

[m.chalmers]

That Thompson is actually a "de mil'd" dummy, it (and all of the vehicles) belong to the father of one of the leaders in our scout troop. We camp at his place during the summer. He lets the boys play with a bunch of stuff. He and the leaders drive them around in the vehicles.

I could only dream of having the cash and gear it takes to re-enact!

I'll put up a few more pics for ya when I find them.

In the mean time, I have Mitutoyo thread gage (model 188-111) 4 to 42 tpi. free to good home!

I'll take the thread gage.
Already have some stuff up. Lets put up an AR 15 A2 (finger grove) pistol grip. PIF to Jake McCracken per a PM. Still have the Safariland 2955/2197 holster also.
Thanks,
Mike

[WickedGoodOutdoors]

Jake McCracken


The Black Beret is on its way.

(PS Got the cappers, Thanks)

[Jake McCracken]

Here are the rest of the pics...

http://mysite.verizon.net/redknightspa24/1.jpg
http://mysite.verizon.net/redknightspa24/2.jpg
http://mysite.verizon.net/redknightspa24/3.jpg
http://mysite.verizon.net/redknightspa24/4.jpg

The kid is a WWII nut and wants to join the Army to go Airborne when he grows up. He wears a full BDU outfit with the LBE gear on Boy Scout campouts. My wife thinks it's strange, but I figre it's better than having the black fingernails and lipstick Goth look, or the punk rapper look of most kids his age!

Jake


BTW, I calimed the Pistol Grip for his AR

[Ricky P]

if i join the boy scouts can i play with the same toys and iam old enough to drive one also? Cool stuff that fellow has nice to see hes sharing it with the troop and I would guess others.

[Jake McCracken]

if i join the boy scouts can i play with the same toys and iam old enough to drive one also? Cool stuff that fellow has nice to see hes sharing it with the troop and I would guess others.

Well, if you'd like to drive up here to our weekly scout meetings to join our Troop, we'd love to have you! :mrgreen:

The rules last time, was the adults could drive anything (and believe me, I did). The kids had to be approved by the owner and were limited to the MULE. (first pic in post 225 is the MULE)

It was one hell of a weekend! The way I undestand it the guy is getting a little older, and dosen't do as many re-enactments, but still shows them off once in a while!

(more pics here) (http://www.castboolits.gunloads.com/album.php?albumid=133)

Oh, and if you think the vehicles are cool, you should see the HUGE gun collection he has! He could arm a small Army. When the "zombies" come, I'm headed to his place!

BTW if anyone has any old camping or backpacking gear to give away I know a scout troop that would love to make good use of it! Just shoot me a PM.

[mikenbarb]

Jake, Were you at the Sussex Fairgrounds this weekend?

[Jake McCracken]

Jake, Were you at the Sussex Fairgrounds this weekend?

No, we were at West Branch State park for the clean up project (and free camping).

The "Wartime" pictures were from a campout last summer...

Why do you ask? Did we miss something good there?

Jake

[mikenbarb]

Yep, It was a huge military show with 5 indoor buildings filled with goodies. Plus the whole fairgrounds were filled with military vehicles.

[camotruck]

:hijack:

[Jake McCracken]

:hijack:


Does it really count as :hijack: if the OP is in on it? :bigsmyl2:

Jake, Were you at the Sussex Fairgrounds this weekend?

[Tristan]

Newenglandcharters, I'd appreciate the M1 Enbloc clips, if they aren't already claimed. If the spam can of ammo was 192, there'd be 24 clips...

I'll dig around and find something interesting to PIF with. Is anyone interested in a small network hub or router?

Tristan

[manleyjt]

Tristan,
what have you got in the way of a hub?

[rmb721]

I received the 6.5 bullets from MT Gianni today.

Thank you.

[WickedGoodOutdoors]

Newenglandcharters, I'd appreciate the M1 Enbloc clips, if they aren't already claimed. If the spam can of ammo was 192, there'd be 24 clips...

I'll dig around and find something interesting to PIF with. Is anyone interested in a small network hub or router?

Tristan


Here you go.

Just E mail me your address.


stripper Clips.



http://www.helstongunsmiths.com/shop/images/Picture-087.jpg


Blueberry Bushes should be ready to dig next week, .223 brass is still accumulating. next week also

[Idaho_Elk_Huntr]

Here you go.

Just E mail me your address.


stripper Clips.



http://www.helstongunsmiths.com/shop/images/Picture-087.jpg


Blueberry Bushes should be ready to dig next week, .223 brass is still accumulating. next week also



Hopw many blueberries bushes. I would like a few of those

[xd shooter]

Blueberry Bushes should be ready to dig next week, .223 brass is still accumulating. next week also

Were you goimg to PIF the .223 brass? If so I'm interested.

[WickedGoodOutdoors]

.223 brass is spoken for. Its going to Mike

bLUEBERRIES.

iLL HAVE TO SEE HOW MANY i CAN DIG AND PRUNE

[Jake McCracken]

Just got word on some screwy shift hanges and layoff **** at work. I will get the PIF's I have to send out on their way. Please be patient, my budget just got a little tighter... I will get them all delivered though!!!

ETA

XD Shooter, I have a bunch of .223 to process (clean and remove crimp on primer pocket) once I get it all done, if I have enough (and I should!!) I'll PM ya and get some out to ya!

[xd shooter]

Thank you Jake. Just let me know when & I will get something else up. I'm still ahead from post #148. I denied my claim so someone else could have it.
I will keep It going.

Thanks again

[Tristan]

Tristan,
what have you got in the way of a hub?

Ok, I've hunted up the hub. It's a 2.4ghz wireless/4 port wired hub/router, but I can't find the power supply!

It was in the 'To be Tested' box (the router, that is), so I don't feel right sending it out till I can power it up and maybe even download the newest microcode...

I'll keep looking for the PS.

- Tristan

[xd shooter]

Alright fellers, it's bout time to go fishing so I'm going to PIF some spinnerbaits that I made to get this rolling again. I will let go of 4 of them in lots of 2 not all to the same person. I want input on how I done.
We can work out small details in PM.(color,weight, & blades)

First ones to put I want it along with PM is the winners.Two gone to Muddy Creek Sam

Examples:
http://i302.photobucket.com/albums/nn101/Angeliablackwell/Baits2011.jpg

[kyle623]

wife said the package showed up in the mail today Jake. Thanks again

[Cowboy5780]

XD i'll give you some input right now those look great all i can say is i wish i still was able to fish

[Muddy Creek Sam]

xd Shooter,

I'll take two and PIF a Lyman J to X shellholder adapter.

Sam :D

[xd shooter]

2 gone 2 to go.

[Jake McCracken]

I'd like to PIF a standing invitation to stop by my camp in Butler PA (actually seasonal campsite) for a beer (or Pop for the non alcohol types) and maybe lunch or smores. E-mail or PM me if you're in the area!

[Jake McCracken]

Just wanted to let everyone I owe know that you're Items were shipped Monday afternoon (April 27th) Except the thread gage which will ship today or tomorrow...

Sorry for the delay!!

Jake

[Jake McCracken]

If anyone has some once fired Remington hulls, I could really use them. Just started reloading for shotgun and I have 2 kids that want to start trap this year. Yay, another caliber to reload for!


I can PIF with a box or 2 of IMI 9mm Subgun ammo. I wouldn't fire it in anything NOT +p+ rated, but it's 9MM 115G FMJ's if you want to break it down. IIRC, 30 Rnds per box.

PM Sent about 100 pound feed sack full of Hulls for ya!

BTW that 9mm fed better and got tighter groups than any other ammo I've ever ran through my carbine. If you find any more, let me know!!

Oh, and does anyone have any shipping suggestions for something that large?

[45nut]

45nut i can use the Jenning's J-25 magazine if still available. and i will PIF with 39 pulled down primed never fired 7 Mag cases
http://i123.photobucket.com/albums/o301/rick4570/Picture037.jpg

Rick

I missed this but it is YOURS. :coffee:

[WickedGoodOutdoors]

a Big handfull of .308 Brass.

Yup. you heard correctI dont have a .308 so its up for grabs. Just pay Postage for a small flat rate box and its yours.


Capt Walt
Newenglandcharters@maine.rr.com





http://www.lpstuff.com/shop/images/uploads/Pirate_CLOSE.jpg

[Tn_River_Ratt]

I'll take it.....pm me your info

a Big handfull of .308 Brass.

Yup. you heard correctI dont have a .308 so its up for grabs. Just pay Postage for a small flat rate box and its yours.


Capt Walt
Newenglandcharters@maine.rr.com





http://www.lpstuff.com/shop/images/uploads/Pirate_CLOSE.jpg

[j20owner]

I know mikenbarb is the OP on this thread, but I'd like to reiterate the purpose and soul of this thread.

1. If there is an item posted that you'd like to have, you should post and 'I'll take it!' and send a site IM.

2. If you 'take' an item from the thread, you should 'give' an item to the thread before 'taking' another item, to keep yourself even.

3. If all PIFers would pay for outbound shipping, it'll all work out even in the end. It makes it easier on all parties to not have to send shipping payments for items. JMHO.

Also, the whole thread has become rather confusing as to what's still available and what all has been taken. I've just spent the better part of 2 hours trying to skim through the thread and see if there are any items left that I'd be interested in, and to see if anyone is 'taking advantage' of the thread. I'm going to try and post a reply with who has what still available. I'm sure it's not all correct, but it would be helpful if we could get this updated and get everyone to even, or at least mostly on the positive.

Another also. If 'taking' and item, please use the QUOTE function to quote the original post of what is being offered. Inside the quote, please edit out the unnecesary chit-chat so that just the item in question is being quoted.

Not trying to step on any toes, but I would like to keep this going and keep it on a positive note.

[j20owner]

MikenBarb: 100ct Saeco115 9mm, 29ct 270 R-P brass

BeanFlip: 1" scope rings, Ruger stickers

RudyC: gun locks and .45 ACP brass

Brennemanj83: 200ct. Lee 379-250-RF, 50ct Lee 459-500-R, 300wsm brass, 50ct. 429-255-SWC, 9mm brass

Wonderwolf: test tube stoppers, RCBS primer pocket cleaners

DanWalker: 9mm and 40S&W brass

MuddyCreekSam: Lyman Shellholder adapter

Lon371: Range Brass Assortment

Marlin Reloader: C&H shotgun press parts/dies, walnut media(i think this is gone, but not sure)

NewEnglandCharters: Desicant Containers

azcozyhunter: .45acp, .357Mag, and 40S&W brass

Me: 7.62x39 blanks

westwindmike: 40S&W brass

txbirdman: Pachmyr N-Frame S&W grips

m. chalmers: Safariland 92fs holster

joe33050: S&W Pamphlets

tdd4570: 40S&W brass

dbrown: RH SAA 4.75"holster

xdshooter: spinnerbaits

jaybird62: Various Muzzleloader Sabots

1911sw45: Lee Auto-prime Shellholders

waksupi: Books

selmerfan: Remington 700 J-Lock Bolt pin/spring/shroud

Blackhawk: HKS 22lr Speedloader

tristan: Router/Hub


I think that's everything. Like I said, I'm sure there's stuff listed that's actually gone and stuff that is still available that I missed. If you could quote this post and your username only and update your items, I think it'd be very helpful to the life of this thread.

[briang]

I think it would be helpful if the giver would edit their post to say "taken by XXXXX" after the item was taken. That way there would a lot less confusion.

[Muddy Creek Sam]

I still have a Lyman J to X shellholder adapter available.

Sam :D

[mikenbarb]

+1 j20owner. Thanks.
I would like to see this thread turned into a page like the sale page and when an item is taken it is replied to that specific post like on the WTS or WTB page. Im not sure if its possible but it would make life alot easier to keep track of the items taken or still available. I will talk it over with the boss man and see what he thinks. :drinks:

[kyle623]

the 9mm brass i had put up was claimed by rmb721 already. sorry if that didnt get posted.

[rmb721]

The posts for the 9m/m brass are #205 -#207.