25 and 32 auto boolits wanted

[BCall]

I am new to the casting game, but am looking for about 200 each of boolits suitable for 25 and 32 acp loads. If anyone has these to trade, I have some lead from stick on wheel weights that I have separated and melted in 1 lb Lee ingots I could trade. I can also trade some of Ranchdogs 359-190 and 460-350 boolits, but I will warn you my casting is not great, so they may not be up to your standards. I can furnish pics though. Any help would be appreciated. Thanks, Billy

[ktw]

I don't know what size/weight parameters are appropriate for the 32 ACP. I have two .312-.313" molds that throw a bullet around 98 grains that I use in the 32 H&R magnum (RCBS 32-98-SWC and a group buy Lee 32-98-Keith).

I would be willing to send you samples of either of those designs if you think they might work.

-ktw

[BCall]

Thanks ktw, I think they are probably a bit heavy for the 32 acp, the heaviest load data I have is for an 84 gr boolit. I appreciate it, but unless someone has had experience shooting these already, I'll have to pass. I'm not sure I can shoot them safely. I appreciate it, Billy

[ktw]

Ran across the following this evening and thought of this thread.

http://www.ranchdogmolds.com/forum/viewforum.php?f=12

Ranch Dog appears to be working on offering molds for both of the cartridges provided you are willing to wait around for them to get through development and into production.

-ktw

[BCall]

Thanks ktw, I'll keep an eye on them. Looks pretty early in development, so it may be awhile, hopefully they make it. Thanks, billy

[Springfield]

I have a mould for 74 grain RN 32 bullets that I use my 32 autos. I can always use some soft lead. You want them as-cast or sized and lubed? mwwhyte@comcast.net

[markshere2]

I have a mould for 74 grain RN 32 bullets that I use my 32 autos. I can always use some soft lead. You want them as-cast or sized and lubed? mwwhyte@comcast.net

My friend is looking for me to load some 32 ACP brass up for him.

I'm still looking for the dies, but they will come eventually.

Are you still interested in swapping lead for Boolits?

I have wheel weight ingots I can send.

I would like sized lubed boolits please.

Best regards,

Mark