New member saying HI and a question [Archive]

Wayne S

01-17-2009, 10:19 AM

Greetings everyone, i started casting in the early 80's useing the kitchen stove, an Alum. pot, hand lubing lyman 31141's and 311467's, useing a cur off 30-06 case as a kookie kutter and seating GC with a hammer.

Fast forward to today and my question, has anyone done a side by side compairson between the RCBS silhouette {SP] bullets and the Saeco counter parts in 7 MM and .30 Cal. with the TC nose ?? OR between the SP and TC designs Saeco offers in 7 MM ??

DLCTEX

01-17-2009, 10:27 AM

Welcome! I can't help with your question but I'm sure someone will have the information you need. There is an amazing wealth of knowledge here. DALE

mooman76

01-17-2009, 10:59 AM

I can't help you either because of o experience with these bullets,but, Welcome to the board none the less!

home in oz

01-17-2009, 11:07 AM

Welcome!

You should have your answer soonest with a fine group like this!

44man

01-17-2009, 11:09 AM

Greetings everyone, i started casting in the early 80's useing the kitchen stove, an Alum. pot, hand lubing lyman 31141's and 311467's, useing a cur off 30-06 case as a kookie kutter and seating GC with a hammer.

Fast forward to today and my question, has anyone done a side by side compairson between the RCBS silhouette {SP] bullets and the Saeco counter parts in 7 MM and .30 Cal. with the TC nose ?? OR between the SP and TC designs Saeco offers in 7 MM ??
Welcome! [smilie=2: The only scary thing you said was about using an aluminum pot! :o