Looking for info...again

[skeet028]

Have a mould here I don't even remember buying.. It is a single cavity Only markings are 308 170 and X Q No name on the blocks..There is a name on the Sprue Plate however First letter is incomplete but seems to be a B W. DARR..It is new and just wondering if anybody has any info on it. Nice radiused flat nose bullet. Thanks

[Slowpoke]

Have a mould here I don't even remember buying.. It is a single cavity Only markings are 308 170 and X Q No name on the blocks..There is a name on the Sprue Plate however First letter is incomplete but seems to be a B W. DARR..It is new and just wondering if anybody has any info on it. Nice radiused flat nose bullet. Thanks

http://www.assra.com/cgi-bin/yabb/YaBB.pl

The mould was made by Barry Darr , he recently retired, his partner is still makeing the moulds you could ask at the above link, Jim Borten I believe is the fellow to ask.

good luck

[skeet028]

Thanks for the info. Looks like a nice bullet so I'll probably use it in the future.

[runfiverun]

barry darr molds are pretty good ones.
the x and q i bet are the cherry maker and cherry unit number.