Cast iron muffin pan

[boogerloo]

I found this at
http://www.jungleothings.com/product_info.php?products_id=23294875
Am I wrong to wonder why they are so cheap? 6.75 each?
Kevin

[Bret4207]

I can buy one and sell it to you for $49.99 if it'll help!:mrgreen: Yeah, they're probably cheaply made, but you never know, it might last you 40 years.

[94Doug]

So far, whenever I find a deal like that the shipping makes it a.... well, no-deal.

[cajun shooter]

I went to the site and punched in the biscuit pan for 13.10, then went to check out. Shipping was 13.60 for a pan that cost 13.10 As Doug said that makes it a "NO DEAL"

[canebreaker]

I can stick 4 of these ingots in my bottom feeder at once to start.
http://www.jungleothings.com/product_info.php?products_id=17932878

[SpaceGlocker]

that pan is usually available a BEALL's Outlet if you live in florida......and no shipping!

[azrednek]

Swallow your pride and go into a Goodwill or similiar charity run thrift store and buy muffin pans for about 50 cents. While you're there check out the cast iron pots and ladles for casting ingots.

[opentop]

Swallow your pride and go into a Goodwill or similiar charity run thrift store and buy muffin pans for about 50 cents. While you're there check out the cast iron pots and ladles for casting ingots.

I tried that, No cast iron at my local goodwill store. As a matter of fact, about all they had was clothes.

Now, the wife and I went to cracker barrel the other night to eat, and they had all kinds of cast iron muffin pans. They have six holes and run about 17.00 each.

[compass will]

I just run the stamped ones from the "cheep stores". First time you coat them with mold release spray, then they work great. Never needed to re-coat them.

[carpetman]

I just bought a Lyman ingot mold (bought it used) that was over 40 years ago. Now I cant tell war stories about where I find muffin tins,cant comment on teflon coating,cant comment on whether to use Pam or not,cant comment on aluminum muffin pans. Disregard this post.