j4570
02-03-2021, 06:29 PM
Everyone,
These items are surplus to my needs. All are PLUS SHIPPING. No shipping on these outside of the US. Payment via USPS Money Order (the ones from the Post Office) or Paypal Family and Friends ONLY. No exceptions. 1st post followed by email to jw4570$verizon.net (change the $ to @). Also, I work so I might not be able to respond right away if I am in the middle of something, but will check when work ends.
Shipping will be via USPS Flat Rate. You must give me an address the postal service delivers to. Most die sets will fit in a small flat rate box (Hornady excepted). More than 1 set will need to go in a medium flat rate. Current flat rate prices are:
Small-$8.45
Medium-$15.50
Here's an overall shot:
276879
Now for the Dies one at a time:
3. 38 Special Hornady Nitride 3 die set. Extra decap pin, both seater plugs (RN and SWC/WC), and extra circlip for seat die (this is how Hornady ships them). I took these in trade and the lock rings had been replaced with LEE lockrings when I got them. $35 plus shipping. This set must ship in a medium flat rate box unless I toss the red box and put the dies in wrapped in bubble wrap in a Small Flat Rate Box for $8.45. Or I can put the set in the red box in a small flat rate padded envelope for $8.55 but since it offers practically no protection for the red die box, I cannot be responsible if it gets cracked during transit.
276882
4. 44 Special/Magnum Carbide RCBS sizer. An older one but it's carbide as you can see on the die. Will be a great addition to one of the steel sets below or as an upgrade to your current set. $20 plus shipping.
276883
276884
5. 44 Magnum RCBS steel die set. An older set with the unthreaded sizer die than cannot accept a decapper. The expander is also the decapper. The dies are labeled as 44 Magnum so they may not work for a 44 Special. Since you can't put a decapper in the first die, you can't really use this on a progressive press unless you decap before you load. They have surface rust. $15 plus shipping.
276885
6. SOLD and Delivered44 Magnum RCBS steel die set. This set is threaded in the sizer die but does not have a decapper (you can get them from RCBS). The expander is also the decapper. The dies are labeled as 44 Magnum so they may not work for a 44 Special. You will need to add a decapper in the first die on a progressive press unless you decap before you load. Fair condition. $20 plus shipping.
276886
7. 44 set from Parts. 44 Spl/Mag Lyman Steel Sizer die, 44 Lyman "M" expander die, 44 Magnum RCBS seat die. The seater is not labeled Special so it might not crimp a 44 Special. $30 plus shipping.
276887
These items are surplus to my needs. All are PLUS SHIPPING. No shipping on these outside of the US. Payment via USPS Money Order (the ones from the Post Office) or Paypal Family and Friends ONLY. No exceptions. 1st post followed by email to jw4570$verizon.net (change the $ to @). Also, I work so I might not be able to respond right away if I am in the middle of something, but will check when work ends.
Shipping will be via USPS Flat Rate. You must give me an address the postal service delivers to. Most die sets will fit in a small flat rate box (Hornady excepted). More than 1 set will need to go in a medium flat rate. Current flat rate prices are:
Small-$8.45
Medium-$15.50
Here's an overall shot:
276879
Now for the Dies one at a time:
3. 38 Special Hornady Nitride 3 die set. Extra decap pin, both seater plugs (RN and SWC/WC), and extra circlip for seat die (this is how Hornady ships them). I took these in trade and the lock rings had been replaced with LEE lockrings when I got them. $35 plus shipping. This set must ship in a medium flat rate box unless I toss the red box and put the dies in wrapped in bubble wrap in a Small Flat Rate Box for $8.45. Or I can put the set in the red box in a small flat rate padded envelope for $8.55 but since it offers practically no protection for the red die box, I cannot be responsible if it gets cracked during transit.
276882
4. 44 Special/Magnum Carbide RCBS sizer. An older one but it's carbide as you can see on the die. Will be a great addition to one of the steel sets below or as an upgrade to your current set. $20 plus shipping.
276883
276884
5. 44 Magnum RCBS steel die set. An older set with the unthreaded sizer die than cannot accept a decapper. The expander is also the decapper. The dies are labeled as 44 Magnum so they may not work for a 44 Special. Since you can't put a decapper in the first die, you can't really use this on a progressive press unless you decap before you load. They have surface rust. $15 plus shipping.
276885
6. SOLD and Delivered44 Magnum RCBS steel die set. This set is threaded in the sizer die but does not have a decapper (you can get them from RCBS). The expander is also the decapper. The dies are labeled as 44 Magnum so they may not work for a 44 Special. You will need to add a decapper in the first die on a progressive press unless you decap before you load. Fair condition. $20 plus shipping.
276886
7. 44 set from Parts. 44 Spl/Mag Lyman Steel Sizer die, 44 Lyman "M" expander die, 44 Magnum RCBS seat die. The seater is not labeled Special so it might not crimp a 44 Special. $30 plus shipping.
276887