View Full Version : WTB Lee .41 175gr SWC mould
Texas by God
10-25-2020, 10:05 AM
I’m looking for one of these; I realize that they are discontinued. Please let know if you have one you don’t need, thanks! This is a .410" mould; I can't remember if it is TL or regular lube type.
armed_partisan
10-25-2020, 08:32 PM
I have a Lee .41 Tumble Lube Mold from back when; have to check which one (might be a TC design?) I have a half dozen other molds in .409 caliber I prefer. I'm looking for .32 ACP/.32 S&W dies and heavy .30 molds if you want to trade. Will send pics after work.
Texas by God
10-30-2020, 10:43 PM
Still looking......but hearing crickets......
Sent from my SM-A716U using Tapatalk
Wheelguns 1961
10-30-2020, 10:56 PM
I have an arsenal mold that I don’t use anymore. I think I sent you some bullets from this mold a while ago. Any way it is a no lube groove mold for powder coating, and it is heavier. I will dig it out tomorrow if you have any interest in it.
skeet028
10-31-2020, 12:38 AM
I do have one I no longer use. Will hunt it down tomorrow. I tend to use the heavier 41s
Old School Big Bore
10-31-2020, 03:50 AM
I have two of them; I bought a duplicate to make boolits for a shooting buddy and didn't realize I already had one. I'll grab it in the morning and PM you.
Ed <><
Texas by God
10-31-2020, 01:54 PM
Thanks!
Sent from my SM-A716U using Tapatalk
Texas by God
11-04-2020, 04:19 PM
I just remembered this. Last bump I guess.
Sent from my SM-A716U using Tapatalk
Old School Big Bore
11-04-2020, 05:21 PM
Gettin PM ready.
Ed <><
redhawk0
11-04-2020, 05:36 PM
I have a 90431 .401 175gr SWC I could give up. 2 cavity PB TL design.
Check the Lee part number for pictures in google....if it's what you want I'll give it up.
redhawk
skeet028
11-04-2020, 08:26 PM
I did find the one I have. It is a single cavity th0ugh
Texas by God
11-04-2020, 09:09 PM
Gettin PM ready.
Ed <><PM replied to
Sent from my SM-A716U using Tapatalk
Texas by God
11-04-2020, 09:09 PM
I have a 90431 .401 175gr SWC I could give up. 2 cavity PB TL design.
Check the Lee part number for pictures in google....if it's what you want I'll give it up.
redhawkWrong mould but thanks!
Sent from my SM-A716U using Tapatalk
Texas by God
11-04-2020, 09:10 PM
I did find the one I have. It is a single cavity th0ughPM sent
Sent from my SM-A716U using Tapatalk
redhawk0
11-05-2020, 10:42 AM
Wrong mould but thanks!
Sent from my SM-A716U using Tapatalk
Sorry...my Dyslexai is showing. :smile:
redhawk
Texas by God
11-25-2020, 12:52 AM
I just remembered that I'm still looking for one of these .41 Action Express Lee moulds....
Sent from my SM-A716U using Tapatalk
deltaenterprizes
11-25-2020, 09:00 AM
SAECO makes a nice 410 175 SWC mold, more expensive than LEE.
Texas by God
11-27-2020, 09:47 AM
SAECO makes a nice 410 175 SWC mold, more expensive than LEE.Thanks for the tip, but I don't want to spend $150+ for a mould and handles.
Sent from my SM-A716U using Tapatalk
cwlongshot
11-27-2020, 10:44 AM
I have a few 41 molds. If ya would like a selection Id happily put them together if you float the postage. SFR 8$
CW
Ilwil
12-03-2020, 01:05 AM
Redhawk, do you still have this mould? I have been looking for one of these, a Lee .40 2cav, TL 175 grn mould. I'll happily buy it if you want to sell it.
Bill 425-337-7338
deltaenterprizes
12-03-2020, 08:49 AM
Redhawk, do you still have this mould? I have been looking for one of these, a Lee .40 2cav, TL 175 grn mould. I'll happily buy it if you want to sell it.
Bill 425-337-7338
I think a PM will get a quicker response!
Texas by God
12-03-2020, 11:17 AM
Please close this thread.
Sent from my SM-A716U using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.