PDA

View Full Version : A favor from Swag-o-Matic owners needed



Ballard
12-08-2008, 12:16 AM
I purchased a bunch of Swag-0-Matic equipment. I am, however, missing the Bullet nose punch holder, the bolt and the spacer. It appears I'm going to have to make them. Would someone be so kind as to measure them for me? Im flying blind here. Thank you.

Ballard

scrapcan
12-08-2008, 12:19 PM
Ballard,

Send Floodgate a pm. He has a swagomatic set. He sent me a copy of instructions but I do not have any parts to measure for you.

Pressman
12-09-2008, 06:13 PM
The bolt is 5/16"-24 tpi, 2"-1/4" long. The body is 1-3/4" long, 1"-18tpi. Don't know about a spacer, mine does not have one.
Ken

Ballard
12-09-2008, 11:42 PM
Thank you, sir.

scrapcan
12-10-2008, 03:07 PM
Pressman (Ken),

Sorry about the fact I keep forgeting that you are on this forum also. Good to have you here also.

Jeremy