12 ga slugs

[nfg]

I'm trying to find a supplier for 0.727" plus/minus a bit, 12 ga slugs in
800-1500 gr weights for usin in my NEF 12 ga slug hunter ala 12GAFH.

Bridger Bullets was mentioned on one of the forums. I've been trying to find
it but only get a hit for Bozeman Mt and then the rude page.

I have some of James Gates 730 Terminators but want to try something heavier
and would rather buy bullets in the small quantity I will use than get into
casting...

I have a quote from Brooks Moulds for the DARWIN slug and have requested
quotes from a couple of other mould makers in the off chance of not finding
a supplier.

Any help in this matter or direction will get greatly appreciated.

I've been hitting the net 8-10 hours a day for the past 3 days and my eyes
are about to fall out of my head.

Thanks

[HORNET]

Did you check with Dixie Slugs ( member on here, try a PM)? You might want to prowl around in the Casting for Shotguns Forum on here. Some of those guys like seriously heavy stuff.

[longbow]

greg5278 has a full bore mould for 1000 gr. slugs. Not sure if he is interested in selling any but you might try.

He posts on this site so you can PM him.

Longbow

[nfg]

Thanks Guys....I connected with Greg finally...I've been using Dixie slugs for a while now and got interested in doing some "hairier" loads with something larger...been a bit tough finding the right man for the job.

I must have done good last year, Santa's happy and giving me a pat on the back.

Happy Turkey day.