View Full Version : Looking for Lee 452-160 to try for 45 Gap
Outer Rondacker
03-31-2020, 09:01 PM
Like most I am in lockdown. I am looking to Load for 45 Gap. Lee 452-160 RF looks to be promising. Looking for 50+- sized or not to 452. No coating unless powder coated. Money being extra tight at the moment I would like to try a few before I buy a mold. I will pay for the bullets of course. Please let me know if you can help. If I am going to be stuck on the homestead I sure would like to ring some steel.
If you have this lee mold and no longer use it I would be interested in buying it.
sghart3578
04-01-2020, 09:14 AM
I have a bunch cast but I don't remember the size. I can check. I believe they are sized to .451". If so then I would be happy to cast you some fresh.
I don't have a .452" sizer so I can send them as cast and unlubed if you like.
I too am stuck at home. And don't worry about the money, I would be happy to do it.
Steve in N CA
Outer Rondacker
04-01-2020, 11:40 AM
Thanks Steve. Are the 451 powder coated? If so I think they would work fine. If not I do have a 452 sizer and could size and coat my own. Let me know thanks Outer.
sghart3578
04-01-2020, 05:32 PM
No, I tumble lubed them with BLL. I will just cast some up and see what they measure. Also, out in my shed, I have a few boxes of Lee stuff that are extras. There may be a .452" sizer out there, I don't remember.
PM me your address and I will get started.
Steve
Outer Rondacker
04-01-2020, 06:17 PM
Thank you Steve.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.