PDA

View Full Version : WTT: .41 Devistater boolits.



littlejack
02-15-2020, 11:11 PM
Members, up for swap I have 100 .41 Devistater cast boolits. I gc'd them at sizing with pb checks. I sized them .411. The average weight is 194 grains +/- sized, lubed and checked. With my fingernail test, they compare to my own cast boolits with coww. The hollow points are good, but not perfect. Note: "I did not cast these". I traded for them a few years back to one of our members. I never did load and shoot any of them.
I would like swap them for 100 heavier .41 cast boolits. Preferably the Lyman 410459 220 grain swc. I would prefer them not sized, and coww alloy is fine. If you have heavier, thats fine, just nothing less than 220 grains.
I pay freight to you, you pay freight to me.
Regards
Jack

475/480
03-13-2020, 10:52 AM
I have 260gr WFNGC , 285gr WFNGC , 290 gr WFNPB molds , let me check and see how many of each bullet I have. Which weight do you prefer OR a mixture?

Sean

myg30
03-14-2020, 07:31 PM
Can you post a picture of the bullets or send in a email ?

Mike

littlejack
03-17-2020, 07:57 PM
Sorry for the slow reply fellas, my bad. Apparently, I have to many irons in the fire.
Mike, sorry, I dont do pictures.
There is some posts in the cast boolits archives that show the devastator, and I have read others articles on the net as well.
It may not show the .41, but they have the same profile respectivy.
Sean, if you still want to swap, i would like the 260 grain WFNGC.
Thank you for your interest guys.
Regards
Jack

475/480
03-18-2020, 03:36 PM
Let me see how many 260gr I have. I will cast some if not enough on hand

Sean

littlejack
03-18-2020, 03:58 PM
Thank you Sean.

littlejack
03-20-2020, 11:55 AM
Swap with 475/480 in progress.
This post is closed.