PDA

View Full Version : Any Interest in Lead wire?



deltaenterprizes
11-14-2008, 05:15 PM
What is lead wire going for these days? Anybody here buy it? What sizes are you using?

mikenbarb
11-15-2008, 05:23 PM
I use some for swaging and im paying about $1.00 per+ pound when I can find it on partial spools or old stock and always looking for more. Its also great to have because its pure lead and I use it for my BP stuff when im out of pure ingots if im in a pinch.

calaloo
11-16-2008, 10:15 AM
I posted to this thread yesterday. Don't know what happened to it. I have a spool of lead wire that is .250 in diameter. I listed it on the swapping and selling forum several months ago with no interest at all. I wanted to swap it for an equal weight of pure lead. I swage but only .38 and 45 cal. paper patch bullets.

Bill

testhop
11-19-2008, 02:00 PM
calaloo
the lead wire you have is probley pure lead you can try to swage a bullet andsee

shooterg
11-19-2008, 03:31 PM
Geez, Corbin gets $35 for 10 lbs ! and even with flat rate shipping that'll be $4.50 a lb.
Anybody extruding their own would probably have a market for it at half that. I've just started using a core mold for .224 (0.185 mold size) and can see why using the wire is attractive, though more expensive - for my use, 50 grains of lead into 70,000 would give me about 1400 cores for 60 grain bullets - over $0.03 each compared to zero and my time.

GLL
11-19-2008, 06:47 PM
I also tried to trade lead wire straight across for pure lead ingots and got no response. Decided to just melt some of it down and mix with tin 20-1 for Hollow Points !

Jerry

http://www.fototime.com/66E2823EB8D50F6/standard.jpg

georgeld
11-29-2008, 03:24 AM
Jerry:
What's just the five spools of wire weigh?
And pm me or e'mail, with the value you need for it.

Thanks,