WTB: Lee push through sizer in .316

[pastorcurtis]

Does anybody have a Lee push through bullet sizing die in .316 they are willing to part with? If so, please PM me.

Thanks!

pastorcurtis

[mdevlin53]

I bought a lee push through in .314 and used a split rod with emery paper and a pistol drill to make mine. did not take long and works well.
good luck

[Conditor22]

or you can start with 400 wrapped around a dowl, slid the paper-wrapped dowel/rod through the sizer and roll it on your leg or?
Check the size often and when you get close, switch to finer paper (800-1000).
Easy and Doesn't take long.
or
NOE 30Cal .314 Body Bushing (B314) http://noebulletmolds.com/NV/product_info.php?cPath=104_396&products_id=2488
But you will need to buy Push Through Size Die Body http://noebulletmolds.com/NV/index.php?cPath=104_410
and push rod if you don't already have a Lee one

I like the NOE ones, easier to store but --- they mount bottom up so you can't get the force from "cam-over"

I heard lee is making sizing bushings symillar to NOE but don't know anything about them