Lyman All-American 424 SWC seater plug

[Tristan]

Has anyone here heard of a 424 seater plug to match the nose on the 454424 keith SWC? I called Lyman's help line and they offered a number 460L (item 7122460).

Are the nose profiles essentially the same?

Thanks for any info ya'll might have.

- Tristan

[Buckshot]

...........You can drill one out and use epoxy for an exact fit.

..........Buckshot

[C1PNR]

This is on the Lyman web site:

http://www.lymanproducts.com/lymanproducts/index.htm

I do occasionally buy direct from them when the purchase is small, or items not usually found at other vendors, like the empty mould boxes.

[Retired_Handloader]

I realize that this is an old post, but I'll reply, anyway: I suggest the Lyman Seater Plug #348 be tried, as it has a flat surface for seating.

[gwpercle]

I realize that this is an old post, but I'll reply, anyway: I suggest the Lyman Seater Plug #348 be tried, as it has a flat surface for seating.

If you have an ill fitting plug ...
And the boolit has a flat spot on it ... SWC , WC , RF , TC ...
Fill the plug with epoxy or epoxy putty (J-B Weld) let harden and sand dead flat to make a Flat Seating Plug ... it will seat them all better than trying to find a plug that matches the exact profile ...
Gary