Quater bore mold

[kirb]

hello group,

Looking for a couple of .25 cal. moulds for a 25-35 and a 256 Win. Mag will be shot in 10" contenders.


Kirb

[runfiverun]

i.m.o.
for a good 25 cal mold you are gonna have to go to nei or old west bullet molds.
i have looked at most of the others and that is the opinion i have formed.
otherwise look at a saeco.

[beagle]

I use a RCBS 25-100-FN in my .25/35 Marlin rebarrel and I've used a Lyman #257312 and a Lyman #257420 on a .256 Contender with good results.

The RCBS is a special order mould from RCBS and you'll have to look around for a 257312. The 257420 is still stocked by Lyamn and is a good place to start./beagle

[Bullshop]

I have a couple 25 cal Herters molds I would trade for sumthin. I think they are for about 80gn and 100gn spit GC. They are single cavity that I was going to send to Buckshot to have hollow pointed but have not gotten to it. I have lots of others so wont miss these.
BIC/BS