PDA

View Full Version : wtb mold for Italian bodeo 10.35 revolver



HARRYMPOPE
06-15-2019, 09:11 AM
Groove diameter of my Bodeo is .423 cylinder throats on't . 421
something in the 175-200g range would be great.
accurate molds has one I can order but checking here before I do so.hoping maybe somebody has an undersized 44-40 mold laying arround

Oyeboten
06-17-2019, 08:22 PM
I bet you could lap both halves of a .44-40 Mold, Silicon Carbide Abrasive Paper ( the famed black color "Wet-n-dry" kind 320 grit say, ) laid on some 1/4 or 3/8ths inch Plate Glass, using soapy Water...lap each half the same number of passes...when sized, the resulting Bullet ought to come out perfect.