Mach_Cat
06-12-2019, 04:34 PM
Berdon press set up in 357/38
These use standard dies, but sometimes the non threaded area must be reduced in size. Lots of extra parts will be included.
Has the Hulme Case Feeder and freeloader funnel.
This press was owned and in use by Howard Risdon the manufacture of the press.
450$ plus shipping
Will need a cleaning as this has not been used since 1997
Lots of extra parts with it extra shell holders too
Ed
425-919-5068
Edhilton_@hotmail.com
These use standard dies, but sometimes the non threaded area must be reduced in size. Lots of extra parts will be included.
Has the Hulme Case Feeder and freeloader funnel.
This press was owned and in use by Howard Risdon the manufacture of the press.
450$ plus shipping
Will need a cleaning as this has not been used since 1997
Lots of extra parts with it extra shell holders too
Ed
425-919-5068
Edhilton_@hotmail.com