CLOSED: N.O.E. 311-190 FN (30 Hunter) Group Buy

[bluejay75]

N.O.E. 311-190 FN (30 Hunter) Group Buy

239039

239040

Greetings Shooters and Casters,

Al Nelson has given me the rights to join his team and HONCHO and inventory run molds for him. Whats different you might ask??? The amount of molds to run is 10...so turn around time could be as quick as two weeks in some cases.

I only plan to run basic boolits in standard weights and configurations...or boolits that will never make the 20-25 mold minimum. You will sign up here and you will receive a 15% discount for signing up during the group buy period.

N.O.E. 311-190 FN (30 Hunter) - Al has all the tooling for this mold already. We need 5 to get this into the active and 10 molds to run.

GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME

Solid

- 2, 3, 4 or 5 Cavity Solid
- Plain Base or Gas Check with mixed cavities available on 2 and 4 cavity molds.
- Spec your size .311


Prices:

Solid:

2 Cavity- Aluminum- 68.00 + Shipping (Discount Included)
2 Cavity- Brass- 86.00 + Shipping (Discount Included)
3 Cavity- Aluminum-73.00+ Shipping (Discount Included)
4 Cavity-Aluminum- 79.00+ Shipping (Discount Included)
4 Cavity-Brass- 97.00+ Shipping (Discount Included)
5 Cavity-Aluminum- 85.00+ Shipping (Discount Included)



Instructions:

Disguised Email- Solid- Diameter-# of Cavities-PB or GC or PB/GC Mix

Example:

j_bownes at yahoo dot com -SOLID .311- 4 Cavity PB-Aluminum 2 GC-2PB
or
j_bownes at yahoo dot com – SOLID -.311- 5 Cavity

Sign Up List:

Solid:

1)j_bownes at yahoo dot com -SOLID .309- 5 Cavity GC-Aluminum
2)k b s t e n 1 at a r v i g dot n e t at yahoo dot com-Solid- .310- 3 Cavity GC-Aluminum
3)jlcopeland at outlook dot com -SOLID .311- 5 Cavity GC-Aluminum
4)Rkingk75 at g mail dot com -SOLID .311- 4 Cavity GC-Aluminum
5)dimner at gmail dot com - -SOLID .312 - 2 Cavity GC- Brass
6)jklm98315 at yahoo dot com -SOLID-.311- 2 cavity 1 Cavity gc 1Cavity pb brass
7)Fal at gvtc dot com SOLID -.311- 5 Cavity GC Aluminum
8)bluewrench75 at gmail dot com-SOLID .311- 5 Cavity GC-Aluminum
9)tomgarcia15 at yahoo dot com- -SOLID .311- 3 Cavity GC-Aluminum
10)d r o b e r t s k at g mai l dot c o m SOLID -.311- 5 Cavity GC Aluminum
11)markdrstock1 at comcast dot net-SOLID .311- 3 Cavity GC-Aluminum
12)jetbullets dot com-SOLID -.310- 5 Cavity PB Aluminum
13)
14)
15)
16)
17)
18)
19)
20)

[jnutz19]

jlcopeland at outlook dot com -SOLID .311- 5 Cavity GC-Aluminum


Sent from my iPhone using Tapatalk

[bluejay75]

Got you added sir. Im certain that this mold has not been available in all configurations for over two years. I want to see if this is enough boolit to take a full charge of WIN 748, expand on target and stay grouped with a rookie alloy mix of maybe 1:3 Range Scrap to clip on wheelweight.

[rking22]

Rkingk75 at g mail dot com
4 Cavity-Aluminum- GC .311

Just one more to go active!

[Four-Sixty]

Is the 2 cavity brass the same price as the 2 cavity aluminum? Is a top punch available?

[bluejay75]

Is the 2 cavity brass the same price as the 2 cavity aluminum? Is a top punch available?

The price on the brass is a little higher. Good catch sir. TOP punch will come with it.

[jnutz19]

Bump it up! Let’s get this one active!


Sent from my iPhone using Tapatalk

[no34570]

Okay,okay,you have twisted my arm:-P
I'll take a 3 Cavity- Aluminum GC .311 + Postage to Australia 3889
Cheers

[bluejay75]

Thanks sir. Got you added NO

[tomme boy]

Got you added sir. Im certain that this mold has not been available in all configurations for over two years. I want to see if this is enough boolit to take a full charge of WIN 748, expand on target and stay grouped with a rookie alloy mix of maybe 1:3 Range Scrap to clip on wheelweight.

I made this to fit a SAAMI 308win chamber to keep the check in the neck. It has performed for me up to 2400fps. It works well in 3006 also. It casts exactly 0.311" with the specified alloy. I sized all of mine at 0.310". It carries plenty of lube with the two lube groves. And the two groves make it cast much better than having just one grove.

It got the HUNTER name from one of Al's friends that flat out hammered a Elk in his 3006.

[bluejay75]

I made this to fit a SAAMI 308win chamber to keep the check in the neck. It has performed for me up to 2400fps. It works well in 3006 also. It casts exactly 0.311" with the specified alloy. I sized all of mine at 0.310". It carries plenty of lube with the two lube groves. And the two groves make it cast much better than having just one grove.

It got the HUNTER name from one of Al's friends that flat out hammered a Elk in his 3006.

Sir,

How soft to get it to expand? Thanks for the design and history? Pm use at your own risk data if you don’t mind.

[redriverhunter]

how do you all think this bullet would work in a 30.06 sub sonic thanks rrh

[bluejay75]

how do you all think this bullet would work in a 30.06 sub sonic thanks rrh

Im sure it makes a great candidate. I would try Unique.

[rays308]

dbltapn308 at hotmail dot com -SOLID .311- 4 Cavity GC-Aluminum

[redriverhunter]

jklm98315 at yahoo dot com -SOLID-.311- 2 cavity 1 Cavity gc 1Cavity pb brass

[tradbear55]

bluewrench75 at gmail dot com
5 cavity aluminum-solid, .311 GC

[bluejay75]

Who says a 300 BO subsonic MUST weigh 200 grains. This is going to stack well and shoot great in 300 BO!!!

[Ramson222]

I will get one also if I can shoot it supersonic @ 1700fps, in my blackout. Ramson 22 at yahoo dot com - solid .311- 2 Cavity- Aluminum GC

Looks a lot like the lee 312-155-2r which is the best shooting bullet Ive tried so far in my blackout, I also think this will shoot great.

[tradbear55]

Bump it

[Pablo 5959]

Paulmi6560atyahoodotcom SOLID .311- 4 Cavity GC-Aluminum
I’ll get in line for this one.

[osteodoc08]

3c GC AL
t o m g a r c i a 15 at yahoo dot com

[bluejay75]

Sending this one to Al this week to add to run schedule. Hes a little behind at the moment...but I will say this will be out in the next 21-30 days.

[no34570]

I reckon this will be great in my 30cal rifles,mainly the .308W & 30/06
I can wait for this.

[kbstenberg]

I can't pass on this one again. 1 3 cavity all GC Aluminum dia. .310
k b s t e n 1 at a r v i g dot n e t
This is the last time this week i check GB.

[Yodogsandman]

Can this be made with a .314" or .316" diameter base, please?

[Pablo 5959]

I’m going to have to back out of this one.
Paulmi6560atyahoodotcom
I picked a very similar Lyman 311041 today.

[tomme boy]

Whats up with NOE? I have tried to contact him 3 times by email and not heard back. been about a month since I sent the last one.

[glaciers]

Will the $1000 club discount also be applied?

[F_L]

Fal at gvtc dot com SOLID -.311- 5 Cavity GC Aluminum

[bluejay75]

Couple more and we close this one. Will give Al some time to get caught up as well. Thanks gents.

[no34570]

Bluejay75
Sorry,have to bail on this one,bought one very similar,from CBE here in Australia off a mate that was getting rid of a few molds.
I am number 5 on the list
sorry

[rays308]

Hi Bluejay75,

I have to pull out of this also. I bought another mold and no longer need this one.

Im number 7
dbltapn308 at hotmail dot com -SOLID .311- 4 Cavity GC-Aluminum

Thanks
Ray

[bluejay75]

Couple more and this one closes.

[Law.man]

Hey Bulejay, got a couple of qestions if I may:
- can this be done in .314"?
- how much is (approximately) shipping to EU (60200)?

Thanks!

[bluejay75]

Hey Bulejay, got a couple of qestions if I may:
- can this be done in .314"?
- how much is (approximately) shipping to EU (60200)?

Thanks!

Cant get .314 out of this one. Sorry.

[Dimner]

I'll do one...

dimner at gmail dot com - -SOLID .311 - 2 Cavity GC- Brass

[Dimner]

I'm hoping this bullet will be the ticket for my 1903a4 that I have been wanting to use for CMP high power practice at my local club.

Also, I bet this will be a great heavy hitter for my 303 savage

[Dimner]

is this a go?

[bluejay75]

Yes sir. We are 1 short.

[Dimner]

I'm gonna change back to 0.311. apologies :) Also, gonna hit up some people at the gun club to see if they would be interested. Having this during the winter would be a great project.

[davidheart]

Any chance of a hollow point version?

[rking22]

I would change to RG2 HP if offered. Really hoping this gets going soon, ain’t getting any younger :)

[bluejay75]

I asked. He cannot do a HP in this boolit. I think if you get an impact velocity of 1800 most alloys will expand.

[Rescue1008]

I'll be #10. Let's get this ran!

camalone1 at comcast dot net-solid-.311- 3 cavity aluminum-PB

[bluejay75]

Gotcha added. Al is rolling out his new website pilot. Im sure he will get to this one soon and I will close when he says to.

[bluejay75]

Reaching out to Al for run schedule.

[Rescue1008]

Please remove me from the list.

[Broomstraw]

If not too late on this one....I figure if I have the mixed mold, I can shoot both supers in subs (with a little workup) in my 300. Should be a good mold.

ALBROOMS at COMCAST dot NET -SOLID .311- 4 Cavity PB-Aluminum 2 GC-2PB

[Broomstraw]

Hey, did some research. Have decided to go with the 311TL225RN (I think that is the correct number...either way it is the 225gr TL) that Al has on the web site. Decided I have several molds for Supers and the 225 should be a fun sub mold. Please remove me from the list. Sorry......

[jethunter]

I wiĺl take one please.

Terry at jetbullets dot com .310" 5C solid PB aluminum
Shipping to Canada.

[F_L]

Please take me off the list.

[big bore nut]

greggoryashley at yahoo dot com 4 cavity aluminum .311 2 PB 2 GC

[Dimner]

Bluejay,

can you please change mine to :

5)dimner at gmail dot com - -SOLID .311 - 2 Cavity GC- Brass

please and thank you :)

[porthos]

markdrstock1@comcast.net will take 311-190 FN , 3 cavity GC aluminum. did i do this right?

[bluejay75]

I am compiling all molds now for Al. He’s swamped but is about to make us a priority. Whew!!!

Look for updates in the next 24 hours.

[rking22]

I just found and bought one, figures! Anyway please remove me from the group buy.

[John Wayne]

I'd like one. d r o b e r t s k at g mai l dot c o m SOLID -.311- 5 Cavity GC Aluminum

[redriverhunter]

Are we still in waiting on this one. thanks rrh

[Dimner]

Any updates on this?? Seems like it's been forgotten?

[Dimner]

Please remove me from this group buy.

[kbstenberg]

BJ i just saw you have my email account incorrectly listed. k b s t e n 1 at a r v i g dot n e t