PDA

View Full Version : CLOSED: RE-RUN MP MOLDS CLONE RCBS 9MM-147-FN 556 Clone



Wasalmonslayer
03-20-2019, 11:56 PM
238385238386

This was spearheaded by Marcus of WiederladerTV
This is his favorite 9mm bullet and one of my personal favorites in 38 special it is super accurate!


All molds will be set to cast .359
Available in Aluminum 8-cavity or Brass 6 Cavity

Here are the options for this run, you can only choose:
1) Lube groove
OR
2) HiTek No Lube Groove

Price is 90 euros shipped (with discount already implemented - Miha has a price increase due to inflation.)
Add 9 euros for DHL shipping


Sequence of events:
1) Participants order molds and are placed on the list.
2) Group Buy will close (which will be posted on the thread) at some time determined by MiHec.
3) Molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. (Extra molds should be available... order them by PM to MiHec)
4) Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars.
5) After you pay, the mold gets shipped.

This will be a solid only quick run

It will go active at 5 molds and close at 10 so tell your friends and hop on

Wasalmonslayer
03-20-2019, 11:57 PM
Sign up list -

1) middle earth sales and service at g mail dot com - 8 Cav Alum HiTek
2) max at yvmarine.com - 8 Cav Alum .358 (Honcho)
3) kawacharles1973 at g mail dot com - 8 Cav Alum
4) cannibul @ g mail dot com - 6 Cav Brass HiTek
5) Clifton 52 At gmail dot com - 8 Cav Alum HiTek
6) mopedmedic AT hotmail DOT com - 8 Cav Alum
7) vfluckey at midco dot net - 8 Cav Alum DHL shipping (57110)
8) kawacharles1973 at g mail dot com - 8 Cav Alum hi tek
9) brunnerrene AT hotmailDOTcom - 6 Cav Brass Hi Tek .356
10) keith(dot)kohlruss(at)gmail(dot)com - 6 Cav Brass Hi Tek .356
11) kevin underscore c 1520 at yahoo dot com - 8 Cav Alum
12) boo-haaa at hot maildot com - 6 Cav Brass Hi Tek
13) boo-haaa at hot maildot com - 6 Cav Brass Hi Tek
14)
15)
16)

jmort
03-21-2019, 12:18 AM
I will take an 8 cavity NLG
middle earth sales and service at g mail dot com

sukivel
03-21-2019, 01:08 AM
How do these 8 cav molds open? Do they have an extra handle like the Lee’s?


Sent from my iPhone using Tapatalk

Wasalmonslayer
03-21-2019, 08:59 AM
How do these 8 cav molds open? Do they have an extra handle like the Lee’s?


Sent from my iPhone using Tapatalk

Yes sir they have a Lee style cam but are made stronger and have a steel screw as a wear surface so it does not damage the aluminum blocks.

GunFun
03-21-2019, 01:33 PM
Neat. I hate to see other companies scorn a good idea just because Lee came up with it, and lee makes cheap stuff.

Wasalmonslayer
03-21-2019, 02:26 PM
Not scorning them at all. I have a ton of Lee stuff and love it!
I am no brand snob I just pick fruit from the tree that works best for my needs....

I have just seen many people break them because of cutting the sprue to cold.
I have never had one fail but everyone casts a little differently!

These will not break and the small flush drilled screw he puts in the mold keeps the wear from happening to the outer mold surface.
It’s the little things that make the difference :)

Kawacharles
03-22-2019, 03:41 PM
I'm in: 8-cav Aluminium lube groove

kawacharles1973 at g mail dot com

Wasalmonslayer
03-22-2019, 04:14 PM
I'm in: 8-cav Aluminium lube groove

kawacharles1973 at g mail dot com

Got you down Thank you sir!

Wasalmonslayer
03-24-2019, 09:15 AM
Bumpity

Burnt Fingers
03-24-2019, 08:35 PM
I'll take a six cavity brass NLG.

Wasalmonslayer
03-24-2019, 11:21 PM
I'll take a six cavity brass NLG.

Need your disguised email sir.

Thank you

Burnt Fingers
03-25-2019, 09:28 AM
cannibul @ g mail dot com

Papercidal
03-29-2019, 03:05 PM
I’d be in for 1 (possibly 2) no lube groove 8 cavity Clifton 52 At gmail dot com

Wasalmonslayer
03-29-2019, 10:54 PM
Got you guys fixed up

Thank you!

kevin c
03-30-2019, 03:00 AM
Flat base only, no bevel base? Expected weight difference with/without lube grooves, please?

Wasalmonslayer
03-30-2019, 08:38 AM
Flat base only, no bevel base? Expected weight difference with/without lube grooves, please?

Only flat base

Those are small lube groves so I would guess going HiTek style would add 3-5 grains for a finished weight of around 150-152

Wasalmonslayer
04-05-2019, 12:29 AM
Friday bump

Wasalmonslayer
04-15-2019, 09:03 AM
Monday bump

NYBushBro
04-15-2019, 06:30 PM
Sign me up for an 8-cav Aluminum Lube-Groove. Thanks!

mopedmedic AT hotmail DOT com

thraxx
04-15-2019, 10:04 PM
I'm thinking this might work for a subsonic load...

sign me up.
vfluckey at midco dot net - 8-Cav AL lube groove, and DHL shipping (57110)

Kawacharles
04-16-2019, 07:13 AM
@Wasalmonslayer:

I"ll take another one mold 8 cav Aluminium, but HiTek no groove.

kawacharles1973 AT gmail DOT com

Wasalmonslayer
04-16-2019, 09:09 AM
Sign me up for an 8-cav Aluminum Lube-Groove. Thanks!

mopedmedic AT hotmail DOT com

Got you added sir!

Wasalmonslayer
04-16-2019, 09:12 AM
I'm thinking this might work for a subsonic load...

sign me up.
vfluckey at midco dot net - 8-Cav AL lube groove, and DHL shipping (57110)

Got you fixed up.

Thank you!

Wasalmonslayer
04-16-2019, 09:12 AM
@Wasalmonslayer:

I"ll take another one mold 8 cav Aluminium, but HiTek no groove.

kawacharles1973 AT gmail DOT com


Added you for another.

Thank you

Wasalmonslayer
04-16-2019, 09:13 AM
Just a couple away from active guys [smilie=2:[smilie=2:

Wasalmonslayer
04-19-2019, 08:34 AM
Friday bump

Wasalmonslayer
04-28-2019, 11:27 PM
Bumpski :)

karlB
04-29-2019, 11:10 AM
I would order one of this molds if it would be available in .356. I am tired of resizing thousands of bullets for use in PCC Ar pistol.

Wasalmonslayer
04-29-2019, 07:49 PM
I would order one of this molds if it would be available in .356. I am tired of resizing thousands of bullets for use in PCC Ar pistol.

I am sure this can be accommodated I will add your request if you want on get me your email addy please

karlB
04-30-2019, 07:51 AM
I am sure this can be accommodated I will add your request if you want on get me your email addy please

if it would be in .356 I am in for 8 cav HiTek no groove
brunnerrene AT hotmailDOTcom

Wasalmonslayer
04-30-2019, 08:46 AM
if it would be in .356 I am in for 8 cav HiTek no groove
brunnerrene AT hotmailDOTcom

Thank you!

Just one mold away from closing and heading to production.

misterzr
04-30-2019, 10:39 AM
I would take one in 6 cavity brass HiTek no groove .356 - keith(dot)kohlruss(at)gmail(dot)com

Wasalmonslayer
04-30-2019, 01:44 PM
This one will run thru Sunday then it will close and I will send the list to Miha

kevin c
05-03-2019, 10:35 AM
OK, I'm in for one at .359, with lube groove.

kevin underscore c 1520 at yahoo dot com

Wasalmonslayer
05-03-2019, 09:17 PM
OK, I'm in for one at .359, with lube groove.

kevin underscore c 1520 at yahoo dot com

Got you added.
I put you down for an 8 cav Aluminum let me know if you want to change that to Brass.

Thank You

bushog
05-04-2019, 09:53 AM
I'm in for two 6 cavity brass HiTek versions!

boo-haaa at hot maildot com

kevin c
05-05-2019, 03:13 AM
Sorry about that. Yes to the 8 cav aluminum. Thanks

karlB
05-05-2019, 08:28 AM
No9: please change to 6 cav BRASS .356 HiTek

9) brunnerrene AT hotmailDOTcom - 6 Cav Brass Hi Tek .356

Wasalmonslayer
05-05-2019, 09:05 AM
I'm in for two 6 cavity brass HiTek versions!

boo-haaa at hot maildot com

Got you added sir
Thank you!

Wasalmonslayer
05-05-2019, 09:05 AM
No9: please change to 6 cav BRASS .356 HiTek

9) brunnerrene AT hotmailDOTcom - 6 Cav Brass Hi Tek .356

Fixed it very sorry....

Wasalmonslayer
05-05-2019, 09:06 AM
Last day before it closes and I send the list to Miha so if you want on jump now :)

Wasalmonslayer
05-06-2019, 09:00 AM
CLOSED
Thank you guys for your orders.
Miha has the list now.

Wasalmonslayer
05-06-2019, 10:51 AM
Molds will start machining this week boys :)

NYBushBro
05-08-2019, 01:22 AM
Give us a shout when the Paypals come out!!!

Burnt Fingers
05-09-2019, 08:10 PM
Yeah, that would be great to know when they go out.

karlB
05-12-2019, 02:02 PM
If there is a way to get another mold in .357 i would order it too.
so if available one 8 cav HiTek in .357 with HANDLES for: brunnerrene ät hotmailDOTcom

Burnt Fingers
05-14-2019, 10:07 AM
Have the paypal invoices gone out?

MiHec
05-14-2019, 12:58 PM
PayPals are out!
If you missing one - send me PM

Kawacharles
05-14-2019, 01:34 PM
Both paid!

Burnt Fingers
05-18-2019, 04:10 PM
Got it, paid it, now waiting by the mailbox.

NYBushBro
05-19-2019, 11:07 AM
Paypal sent yesterday AM. Looking forward to THIS one... as always.

karlB
05-20-2019, 02:54 AM
Nice mold thanks!242083

Burnt Fingers
05-22-2019, 12:09 PM
I received my mold yesterday. Wasn't able to unpack it till today.

It looks to pretty to use, but use it I will!

Papercidal
05-22-2019, 10:15 PM
Mine showed up today. Beautiful mold not like I need another heavy 9mm mold but somehow I can’t resist.

Burnt Fingers
05-23-2019, 06:14 PM
Mine showed up today. Beautiful mold not like I need another heavy 9mm mold but somehow I can’t resist.

Same here. I have the MP round nose and the NOE ELCO and a couple of Lymans.

Mine is dropping at 154 gr with no lube grooves and my Bhn 13 alloy.

kevin c
06-03-2019, 08:52 PM
Still waiting on mine.

Bad enough the site was down today. So is my press and, with various minor physical ailments, so is shooting and casting. Getting crabby...(not your fault, Miha...).

kevin c
06-15-2019, 04:00 AM
Is anybody else besides me still waiting on delivery of this mold?