need help with a PID controller

[Valley Forge]

I bought a PID controller here from "Frozone" some years back and it has become intermittent. I need some help with replacing the thermocouple sensor and I'm unsure of what I'm looking for. I'm attaching a photo of the connector and it appears to be a "K". Can anybody point me in the right direction to get what I need?
Thanks,
Valley Forge

[Conditor22]

K Type Thermocouple Plug Adapter RTD Circuits Mini male Wire Connector
and
K Type Temperature Sensor Probe 1.5M Cable 5mmx100mm Probe Thermocouple 32~1472°F (0~800°C)

[Valley Forge]

Thanks very much!

[mattw]

You should be able to remove and reuse the K-type connector you have. They are not soldered inside, either the wire is wrapped around a binding screw and tightened or they have tiny fork connectors on the wire that can be moved or reused. Be sure to pay attention to the polarity as the do not work backwards.