Plain based 223 mold?

[brewer12345]

I am going to be loading for a break action 223 soon. If I want full power loads I will used j-words. My real interest is in being able to load something 22 mag or higher in power, ideally with a meplat. I plan to powder coat the boolits and will cast out of fairly hard alloy (half lino, maybe with the rest COWW), so I am hoping I can get away with pushing these on the harder side for cast (1800 FPS?). If I can get away with not using a check on these itty bitty boolits, I would love to avoid the hassle.

[5Shot]

Shouldn't be a problem with PC.

[KrakenFan69]

I use the Arsenal Molds 225-61 Elvis for that. Works great for cheap hi volume practice. I Hi-Tek Coat them. I'm not gettign sub MOA with them, more like 2-3 MOA but more could be wrung out of it with further testing.


http://arsenalmolds.com/index.php?route=product/product&product_id=109

235211

Kraken Fan #69

[bpatterson84]

There's an 8 hole one from MP right now as a group buy, I got no gas check and it has a meplat. Should fit your bill nicely. And, if powdercoating, you can shoot them full power. Not too sure why you wouldnt want to.