Which has the largest working room?

[nvreloader]

Guys

Which lube sizer has the largest working room = tallest area at maximum adjustment.

The 45 Lyman has 2-1/2", this is with no parts installed,
top of die opening to the bottom of the main casting........

I may need a larger opening to work with....for my conversion, I am doing.

Tia,
Don

[Rich/WIS]

Checked and both my Lyman 450 and RCBS LAMII are approximately 1/3/4 inches from top of die lock nut to upper frame.

[lightman]

My Star has an opening measuring between 2-7/16 and 2-1/2 inches to the top of the housing. To the top of the die would be about 1/16th less. You might have to look at some of the press mounted dies.

[nvreloader]

Thanks Guys

No one has any other brands, Saeco, Herters or other brands,
I also have a Star 60's model, but I am not messing with it, works too good.

Tia,
Don

[lightman]

Thanks Guys

No one has any other brands, Saeco, Herters or other brands,

Afraid not, sorry! I think a buddy may have an RCBS sizer that I be able to measure.