CLOSED: Re-run- MP 9mm 115gr RN (BB or FB) - cast size .359 only

[Lakehouse2012]

This GB is now closed. If you missed it, get in contact with Miha directly, he may have extra's.

Miha asked me to put this one up, it will be a fast turn-around due to popularity and he already has the cherry waiting to cut molds.

20 orders gets this one into last-call, lets see how quickly we can fill it up!

234432

All molds will be set to cast .359
Only available in Aluminum 8-cavity

Here are the options for this run, you can only choose:
1) Lube groove with either: (Bevel Base or Flat Base)
OR
2) NLG gets you a Flat Base

NOTE- the FB and NLG option will get you upto 120gr when casting WW's.

Price is 90 euros shipped (with discount already implemented - Miha has a price increase due to inflation.)
Add 9 euros for DHL shipping


Sequence of events:
1) Participants order molds and are placed on the list.
2) Group Buy will close (which will be posted on the thread) at some time determined by MiHec.
3) Molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. (Extra molds should be available... order them by PM to MiHec)
4) Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars.
5) After you pay, the mold gets shipped.


Group Buy List

8 Cavity Aluminum

1) (oldhenry) - BB with lube groove - hhwadkinsiii at aol dot com
2) (Ronic) - robert dot davisson at comcast dot net - LG FB 48103- lube groove with FB
3) (starreloader) - 8-cav 115 moulds, BB and lube grove - kdcartridge at hotmail dot com
4) (starreloader) - 8-cav 115 moulds, BB and lube grove - kdcartridge at hotmail dot com
5) (evoevil) - 8-cav 115 moulds, BB and lube grove - evoevil...at....aol….dot....com
6) (warhead) - BB, lube groove - Hamturret at Bellsouth dot net, DHL shipping
7) (Cue) - 8 cav NLG, shipped DHL - hcues1 at aol dot com
8) (misterzr) -8-cav, NLG, FB - keith(dot)kohlruss(at)gmail(dot)com
9) (Kevin c) - BB, lube groove - kevin underscore c 1520 at yahoo d0t com
10) (law.man) - BB lube groove and a set of handles. - worgen(dot)wiki(at)gmail(dot)com
11) (Labguy) - 8-cav 115 mould, BB and lube grove - LCEL at hotmail dot com
12) (GoodAlloy) - 8-cav, Lube groove, BB - Amadaus 101 at outlook dot com
13) (Rickoshay13) - 8-cav BB with lube groove - rickoshay13 at live dot com
14) (Sc0) - NLG - I v t d i at y a h o o dot com
15) (Iron369) - NLG - Ironj369 at gmail dot com
16) (Buck Butcher) - NLG - marksvw at aol dot com
17) (igolfat8) - NLG. - igolfat8 (at) yahoo (dot) com
18) (sfcairborne) - LG, BB - Mywhitty1atyahoodotcom
19) (thraxx) - LG, FB - vfluckey at midco dot net
20)
21)
22)
23)
24)
25)

[oldhenry]

Put me down for a BB with lube groove

hhwadkinsiii at aol dot com

Thanks,
Henry

[Ronic]

This looks like it should be good in light 38 special as well, I'll take one.
robert dot davisson at comcast dot net LG FB 48103

[Lakehouse2012]

Put me down for a BB with lube groove

hhwadkinsiii at aol dot com

Thanks,
Henry

Thanks Henry, I've got you on the list!

[Lakehouse2012]

This looks like it should be good in light 38 special as well, I'll take one.
robert dot davisson at comcast dot net LG FB 48103

Hi Ronic, Do you want the BB or FB and grooved or NLG?

[starreloader]

Put me on the list for 2 of 8-cav 115 moulds, bevel base and lube grove..
kdcartridge at hotmail dot com

[Lakehouse2012]

Thank you Sir, I've got you down!


Put me on the list for 2 of 8-cav 115 moulds, bevel base and lube grove..
kdcartridge at hotmail dot com

[MiHec]

No lube groove is flat base only!

[evoevil]

8-cav 115 moulds, BB and lube grove evoevil...at....aol….dot....com

[Lakehouse2012]

8-cav 115 moulds, BB and lube grove evoevil...at....aol….dot....com

I've got you down evoevil, thanks.

[Warhead]

Put me down for one please! :-D
8-cav 115 mold BB and lube grove.

Hamturret at Bellsouth dot net

[Lakehouse2012]

Put me down for one please! :-D
8-cav 115 mold BB and lube grove.

Hamturret at Bellsouth dot net

I've got you on the list warhead. Thanks!

[Cue]

Put me down for a 8 cavity NO lube groove one shipped DHL.
hcues1 at aol dot com

[Lakehouse2012]

Put me down for a 8 cavity NO lube groove one shipped DHL.
hcues1 at aol dot com

I've got you on the list!

Thanks,

[Ronic]

Hi Ronic, Do you want the BB or FB and grooved or NLG?

lube grove flat base please

[MiHec]

Sorry, FB can only be on the NLG.... :(

Lube groove and flat base is possible

[Lakehouse2012]

Lube groove and flat base is possible

I've adjusted in post #1, hopefully this is now clear for everyone...

[misterzr]

Please put me down for a NLG, PB - keith(dot)kohlruss(at)gmail(dot)com

[Lakehouse2012]

Thanks misterzr, I've got you on the list!


Please put me down for a NLG, PB - keith(dot)kohlruss(at)gmail(dot)com

[kevin c]

I'll bite. One BB with lube groove for kevin underscore c 1520 at yahoo dot com. Thanks!

[Lakehouse2012]

Thanks Kevin, I've got you down!


I'll bite. One BB with lube groove for kevin underscore c 1520 at yahoo dot com. Thanks!

[Lakehouse2012]

1 week bump - I need 1 more buyer, to get this tread into "Active". who wants it?... :)

[Law.man]

I do! Have been waiting a long time for this mold...let me have one BB lube groove and a set o' handles.
worgen(dot)wiki(at)gmail(dot)com

[LabGuy]

What the heck,

(Labguy) - 8-cav 115 mould, BB and lube grove - LCEL at hotmail dot com

[Lakehouse2012]

I do! Have been waiting a long time for this mold...let me have one BB lube groove and a set o' handles.
worgen(dot)wiki(at)gmail(dot)com

Thanks Law.man, I've got you down, this takes us into Active status!!

[Lakehouse2012]

What the heck,

(Labguy) - 8-cav 115 mould, BB and lube grove - LCEL at hotmail dot com

Thanks LabGuy, I've added you to the list!

[Warhead]

May I add DHL shipping to mine please?

[Lakehouse2012]

May I add DHL shipping to mine please?Ive modified for you

Sent from my SM-G920V using Tapatalk

[dimaprok]

How much is 99 Euro converted to dollars through PayPal, I've read PayPal charges more. Anyone ordered not too long ago?

[Lakehouse2012]

How much is 99 Euro converted to dollars through PayPal, I've read PayPal charges more. Anyone ordered not too long ago?The conversation has nothing to do with Paypal, and Miha takes care of any fees. If you do a google search you will see that 99 euros = $112.96 USD today. Tomorrow will be different.

Sent from my SM-G920V using Tapatalk

[GoodAlloy]

Please put me down for 8 cavity Lube Groove, bevel base

[Lakehouse2012]

Sure GoodAlloy, but I need a disguised email for ya please?


Please put me down for 8 cavity Lube Groove, bevel base

[MiHec]

Jump on!

https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/51762318_2327895344107894_4145400716388728832_o.jp g?_nc_cat=110&_nc_ht=scontent-amt2-1.xx&oh=3a5075837a55fa83323c07689afd85b7&oe=5CEFC646

[Rickoshay13]

Please add me for a BB with lube groove. rickoshay13 at live dot com

[Lakehouse2012]

Please add me for a BB with lube groove. rickoshay13 at live dot com

Thanks Rickoshay- I've added you onto the list.

LH2012

[Rickoshay13]

Thanks Rickoshay- I've added you onto the list.

LH2012

Nice! I am #13. Thank you

[Warhead]

Jump on!

https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/51762318_2327895344107894_4145400716388728832_o.jp g?_nc_cat=110&_nc_ht=scontent-amt2-1.xx&oh=3a5075837a55fa83323c07689afd85b7&oe=5CEFC646

You just want to make us all drool don't you? :)

[MiHec]

:twisted::twisted:

[Sc0]

I v t d i at y a h o o dot com - NLG

[Lakehouse2012]

Thanks Sc0, I've got you on the list.


I v t d i at y a h o o dot com - NLG

[dimaprok]

The conversation has nothing to do with Paypal, and Miha takes care of any fees. If you do a google search you will see that 99 euros = $112.96 USD today. Tomorrow will be different.

Sent from my SM-G920V using Tapatalk

I did google prior posting and it says that PayPal uses its own conversion rate which is higher than a "normal" going exchange rate. That's why I asked and yes I realize the exchange rate fluctuates daily. Thanks.

[dimaprok]

Jump on!

https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/51762318_2327895344107894_4145400716388728832_o.jp g?_nc_cat=110&_nc_ht=scontent-amt2-1.xx&oh=3a5075837a55fa83323c07689afd85b7&oe=5CEFC646

I've never seen MP mold before. Is the mold longer than Lee and does it have sprue plate without handle?

[Gamsek]

I've never seen MP mold before. Is the mold longer than Lee and does it have sprue plate without handle?This GB is aluminium 8cav only so they will have Lee style sprue handle, they are same size as 6cav Lee, but much better material and workmanship. Aluminum MP are solids only.
MP makes brass moulds in 2,3,4,6 cav solid and 2,3,4cav in holowpoint Cramer style. Brass have classic thick steel sprue plate. A joy to cast with.

[Lakehouse2012]

I apologize dimaprok, I didnt mean to come off as a bonehead. I honestly did not know that PP does their own take on the conversion. I'm going to look it up next so I'm a bit smarter next time. :guntootsmiley:


I did google prior posting and it says that PayPal uses its own conversion rate which is higher than a "normal" going exchange rate. That's why I asked and yes I realize the exchange rate fluctuates daily. Thanks.

[GoodAlloy]

Please put me down for 8 cavity Lube Groove, bevel base

Amadaus 101 at outlook dot com

[dimaprok]

I apologize dimaprok, I didn't mean to come off as a bonehead. I honestly did not know that PP does their own take on the conversion. I'm going to look it up next so I'm a bit smarter next time. :guntootsmiley:

No problem, you guys are great! I really really like the 8 cavity aspect, and aesthetically I like the round nose profile BUT I found that in my bullet feeding die the ones from Berry's would bind sometimes in the tube stacked on top of each other, but not if they have flat nose than they stack without any issues. Now the Berry's are slightly more pointed so I don't know know exactly how these fare.

[dimaprok]

I apologize dimaprok, I didnt mean to come off as a bonehead. I honestly did not know that PP does their own take on the conversion. I'm going to look it up next so I'm a bit smarter next time. :guntootsmiley:

Follow up in case someone else is interested in conversion rate that PayPal uses. I called PayPal and asked and was told it's whatever the going rate plus about 4%. So I was quoted about $116 USD. I ran the math and got same. Going rate for 99 Euro right now is $111.52 + 4% = $115.95 hope this helps.

[starreloader]

Lakehouse, we need to get this mould moving, only need another 5 or 6 commitments.. I have a real need for this!!

[Lakehouse2012]

Yes, you are right. This should be a mold that everyone needs in their shop.

Sent from my SM-G920V using Tapatalk

[riffer]

How do they size down to .356, wenn shaked and baked? Would need them in a thight chamber too.

Gesendet von meinem Redmi Note 4 mit Tapatalk

[Law.man]

I plan on doing the same, got a PPC with .355 bore, so I will PC them and size to .356. I do the same with Miha's version of H&G 275 and works fine. Sizing down by some 3 to 4 thousands is no biggie.

[Lakehouse2012]

How do they size down to .356, wenn shaked and baked? Would need them in a thight chamber too.

Gesendet von meinem Redmi Note 4 mit TapatalkAs lawman said, they will easily size down .002 especially if NLG.

Sent from my SM-G920V using Tapatalk

[riffer]

The PC adds .001-.002, so im far away from .356 for the thight chambers.

Gesendet von meinem Redmi Note 4 mit Tapatalk

[Law.man]

As I said, another Miha's mold drops me 359, then +0.001 PC and sizes to .356 just fine. The PC actually makes the sizing process easier. If you size right after PC before the lead has a chance to properly harden, it is almost effortless. makes no difference to me whether I size down by 0.002 or 0.004.

[MiHec]

The PC adds .001-.002, so im far away from .356 for the thight chambers.

Gesendet von meinem Redmi Note 4 mit Tapatalk

Should be no biggie to size to .356. I size after hi tek coating.

[Lakehouse2012]

The PC adds .001-.002, so im far away from .356 for the thight chambers.

Gesendet von meinem Redmi Note 4 mit Tapatalk

Have you slugged your barrel or carefully measured it? There aren't many here who will actually size down to 356 for 9mm application. Personally I size to 358 because 5 handguns and 1 rifle I own in 9mm, all require something larger than 356 to assure a tight fit. This mold for .38 special, I wont even size, will use it as-cast in all of my revolvers for PPC matches.

Just a few cents of reasoning....

Lakehouse2012

[MiHec]

I size to .357 for .355 barrels. (I have Tanfoglio Limited Custom with poliagonal and BUL SAS SAW" with traditional barrel). Pull out bullets are usually around .3565+.
No leading and no smoking.

[Iron369]

I’d like to get in on this for a nlg
Ironj369 at gmail dot com

[Lakehouse2012]

Thanks Iron369- I've added you to the list!


I’d like to get in on this for a nlg
Ironj369 at gmail dot com

[Buck Butcher]

I’m in. No lube groove please.

marksvw at aol dot com

[Lakehouse2012]

Thanks Buck, I've added you to the list!


I’m in. No lube groove please.

marksvw at aol dot com

[igolfat8]

I’ll take one NLG.

igolfat8 (at) yahoo (dot) com

[Lakehouse2012]

I’ll take one NLG.

igolfat8 (at) yahoo (dot) com

Thanks, I've added you to the list!

[sfcairborne]

Put me down for LG BB
Mywhitty1atyahoodotcom

[Lakehouse2012]

Put me down for LG BB
Mywhitty1atyahoodotcom

Thanks SFC- I've added you to the list.

LH2012

[thraxx]

I'll take one please.

(thraxx) - LG and FB

[Lakehouse2012]

I'll take one please.

(thraxx) - LG and FB

Thanks Sir, I need a disguised email for you.

We need 1 more buyer, to put this one into last call!! This one will be FAST moving, cause Miha already has them ready to go.

[thraxx]

Thanks Sir, I need a disguised email for you.

We need 1 more buyer, to put this one into last call!! This one will be FAST moving, cause Miha already has them ready to go.

doh! sorry!

vfluckey at midco dot net

[starreloader]

We only need a couple more to sign-up for this 9mm 115gr RN mould to happen..

[MiHec]

CLOSE THIS ONE!

Paypals are out!
If you missing one, send me PM.
I also have some overorder molds....

[LabGuy]

Paid, First time I was ever first!

[Law.man]

Just paid mine, you beat me by a couple of seconds :)

[Iron369]

I had paid at 0732 this morning

[thraxx]

wow, that was a fast turnaround! :D

[Warhead]

Paid 3/11/19 Thanks Mihec!!!:p

[igolfat8]

How do I pay for my mold? I sent him a PM yesterday but no reply?

[Ronic]

Email wasn't added to list so I didn't get it. It's on post #3

[Warhead]

Just got mine in today. What a wonderful mold!!! Mihec as usal your work is the best around!!

[Lakehouse2012]

Email wasn't added to list so I didn't get it. It's on post #3Sorry Ronic, i dont know how that happened.... ive never done that before. Anyways, i updated the list and contacted Miha directly. You should be getting a PP soon.

Sent from my SM-G920V using Tapatalk

[Lakehouse2012]

How do I pay for my mold? I sent him a PM yesterday but no reply?Look at post #1, is the email you gave me correct and easy to understand? Miha will send you an email right through Paypal, check your spam folder as well.

Sent from my SM-G920V using Tapatalk

[igolfat8]

How long does it typically take to receive the mold here in the states after it’s shipped from EU?

[Lakehouse2012]

Email wasn't added to list so I didn't get it. It's on post #3

Ronic- did you end up getting the PP invoice from Miha? I never heard back, so I'm assuming it was fixed?

[Lakehouse2012]

How long does it typically take to receive the mold here in the states after it’s shipped from EU?

Typically 2 weeks, can be as long as 4 weeks if it gets hung up in Customs.

[Ronic]

Ronic- did you end up getting the PP invoice from Miha? I never heard back, so I'm assuming it was fixed?

Haven't received one yet, was logging on to check.

[Iron369]

This is my first group buy. Are we typically notified when the item ships?

[Law.man]

Got mine yesterday, will fire it up today after I get back from work. Beautiful display of craftsmanship I have to say. Kudos to MIHA for another great mold!

[Ronic]

Haven't received one yet, was logging on to check.

received and paid, thanks for the help.

[Buck Butcher]

Mailman delivered my mold today! What a great piece! I am impressed. So much so that I placed another order. I’m on the HP 300 BO list.

Thanks for the rerun,
Mark

[igolfat8]

I received mine today in the mail. Its a thing of beauty.

[Iron369]

I gots mines.

[sfcairborne]

Got mine, can’t wait to use it.

[Rickoshay13]

I noticed folks received their mold a week ago. Still waiting for mine. Did they all ship at the same time? I guess I am asking if I should be concerned at this point? Please advise.

[Lakehouse2012]

I noticed folks received their mold a week ago. Still waiting for mine. Did they all ship at the same time? I guess I am asking if I should be concerned at this point? Please advise.I just received mine yesterday so i wouldn't worry just yet. Customs can create some big delivery delays depending on so many variables. Ive seen differences of 2 weeks when molds were shipped from Miha, on the same day. For future, if you are in a hurry for a mold, choose the DHL option and you will receive within a few days. Hope this helps.

Sent from my SM-G920V using Tapatalk

[Rickoshay13]

I just received mine yesterday so i wouldn't worry just yet. Customs can create some big delivery delays depending on so many variables. Ive seen differences of 2 weeks when molds were shipped from Miha, on the same day. For future, if you are in a hurry for a mold, choose the DHL option and you will receive within a few days. Hope this helps.

Sent from my SM-G920V using Tapatalk

OK, thank you.

Scott

[Rickoshay13]

I just received mine yesterday so i wouldn't worry just yet. Customs can create some big delivery delays depending on so many variables. Ive seen differences of 2 weeks when molds were shipped from Miha, on the same day. For future, if you are in a hurry for a mold, choose the DHL option and you will receive within a few days. Hope this helps.

Sent from my SM-G920V using Tapatalk

Well, guess what arrived today? What a beautiful mold. Thank you for putting this together.

Scott

[Warhead]

Mine arrived a few days ago and is another beautiful mold!!!! Thanks Mihec!!!!