WTB 22 caliber Rifle barrel?

[ronniet]

Looking for a contoured light weight rifle barrel that will finish at 22 or 24" CM steel. unthreaded and unchambered is best.
Has to have a 1-10 or 1-10.5 twist rate .
.224 is OK a .227-.228 grove is best.
I want to thread it for Small ring Mauser so breach has to be 1.100 size if it is not chambered that is good, if it is chambered it should be for something like 22-250 or shorter would be best.
Pm.
Ron

[abunaitoo]

I have an old barrel.
PM sent

[labradigger1]

I have some barrels, all from Winchester model 70’s, 222, 22-250 and a sako I think was in 22-250. No idea on bore sizes

[kycrawler]

I have a 24 inch Remington 223 take off barrel. Bore is nice but the chamber looks like it was cut by a blind monkey with a full drill bit in a hand drill I saved it to do a 22-250 on a turk Mauser but have since barreled it to 358 win

[ronniet]

Thanks the Remington does not have the right twist or groove
Thanks for the reply/

[largom]

I have a heavy Savage barrel 24 in. with 1:9 twist 3/4 in. at muzzle chambered for 223.