Wts:ingots with high tin content

[durango]

As it says-I want to sell ingots with high tin content. The alloys have been tested with XrF by member BNE and the test results are given in the following descriptions.

NOTE:USPS SHIPPING RATES WILL INCREASE ON 1-27-2019!!!! ORDER NOW TO BEAT THE INCREASE.

1. Reclaimed solder joints-Sn=16.4%, Pb=80.4%, and Sb=3.2%. 4 ingots totaling 6 lbs., $15.00+$7.00 shipping.

2. Mono block spacer ingots-Sn=4.6%, Pb=79.9%, Sb=15.2%, and Cu=0.3%. 6 ingots totaling 22.25 lbs.-- $44.00+$7.00 shipping. 4 ingots totaling 15.25 lbs.--$30.00+$7.00 shipping.

3. Printers lead ingots-Lot X-Sn=3.5%, Pb=85.0%, Sb=11.3% and Cu=0.2%. Lot O-Sn=3.4%, Pb=85.4% and Sb=11.2%.

3a.--4 ingots of lot X and 1 ingot of lot O. 19 lbs.--$38.00+$7.00 shipping.

3b.--6 ingots of lot X. 23.5 lbs.--$47.00+$7.00 shipping.

3c.--6 ingots of lot X. 23 lbs.--$46.00+$7.00 shipping.

3d.--6 ingots of lot O. 25 lbs.--$50.00+$7.00 shipping.

3e.--6 ingots of lot O. 24.5 lbs.--$49.00+7.00 shipping.

3f.--6 ingots of lot O. 24.5 lbs.--$49.00+$7.00 shipping.

3g.--6 ingots of lot O. 24 lbs.--$48.00+$7.00 shipping.

Post 'I'll take XX' and PM for payment and shipping info. I can accept PayPal F & F, USPS M/O or cash at your risk. Shipping by USPS flat rate-insurance over $50.00 will be at your expense. I can combine two of the above packages in a Flat rate padded envelope for $7.00.

Thanks for your interest-any questions are welcome, Steve

[Ohio Rusty]

I know the PB is lead ... what do all the other letter descriptions stand for describing the different types of metal ??
Ohio Rusty ><>

[myg30]

Rusty, click below,bottom of the page on Cast bullet notes from lasc. Read on some of the best casting info you will ever need regarding mixing lead, to bnh, to everything casting !!! All the questions you have will be answered there.
Get a coffee, pull up a chair and read.

Mike

[durango]

I know the PB is lead ... what do all the other letter descriptions stand for describing the different types of metal ??
Ohio Rusty ><>

Sn=Tin, Sb=Antimony, and Cu=Copper. Basically, Tin helps molten lead flow into a mold and makes shinier boolits and Antimony is a hardener (raises BNH). Thanks for your question, Steve

[rwadley]

I know the PB is lead ... what do all the other letter descriptions stand for describing the different types of metal ??
Ohio Rusty ><>

Sb is antimony
Sn is tin
Cu is copper

[Txcowboy52]

I would be interested in 2 lots of the solder joints!

[durango]

Back to the top for the weekend.

[durango]

Back to the top

[durango]

Back to the top--SAVE ON SHIPPING!!

[durango]

Back to the top to beat the postage rate increase.