35 Whelen load data

[dh2]

I am trying to find load data for the .35 Whelen with a 225 and 250 gr. cast boolit , So far I have found H4895 J-word data that I can reduce , and SR4759 for the 250 gr. and we all know that powder supply will not hold up for ever.
I would like to find some think using some ting like 2400 or IMR4198.

[Moonie]

I am trying to find load data for the .35 Whelen with a 225 and 250 gr. cast boolit , So far I have found H4895 J-word data that I can reduce , and SR4759 for the 250 gr. and we all know that powder supply will not hold up for ever.
I would like to find some think using some ting like 2400 or IMR4198.

http://castboolits.gunloads.com/showthread.php?43581-35-Whelen-w-cast&p=4524618&viewfull=1#post4524618

FYI I have lots of 2400 if you need some and can't find it, we could meet as you aren't that far from me and my inlaws don't live too far from there.

[Moonie]

Also check this out, Blammer is a serious 35 Whelen guy and he lives in Ashville NC. I've met him at local gun shows.

http://castboolits.gunloads.com/showthread.php?169630-35-Whelen-powder

[Echo]

Not quite what you are asking, but I found that 18.5 grs 2400 under either the RCBS 35-200 or the Lyman 358315, both 208 grs w/my alloy, made one-hole groups @ 25 yards with either boolit...