View Full Version : Good bullet for 9.3 x 62?

12-15-2018, 06:55 PM

Is this a good mold for my CZ Fullstock 9.3x62? The pickings are slim so I don't want to wait too long before I order.

12-15-2018, 07:03 PM
My uses are paper killing and general clanger shooting. Too many hunting rifles to choose from.

12-15-2018, 07:40 PM
I am sorry about the wrong placement of this post. Maybe the moderators can put it in the molds section?

12-15-2018, 10:22 PM
I am using a Accurate 37-285C mold which is pretty much the same design as the NOE mold you have pictured , It works very well for me ,

Prodigal Son
12-15-2018, 10:44 PM
I used that bullet on a nice busk the other day except mine is a gc boolet!232146

01-02-2019, 01:01 AM
The bullet you have in your first post performs. Accurate and deadly. ; )

01-02-2019, 02:57 PM
That is my go to bullet for my 9.3x62. With a charge of Varget and that bullet deer are in big trouble and would hunt elk and moose if give a chance.

01-03-2019, 08:53 AM
Had Veral Smith make me one of his FN GC 250 gr LBT 2-cavity molds several years back. With COWW, water cooled and GC in place, LBT Blue lube, sized .367", using mid to upper 40+ gr charges of Varget and #47 buffer, filled to base of the neck, hitting 2200-2260 fps from a 24" #3 Pacnor barrel. I was getting .8 moa, 5-shot groups. Still haven't used on any cow elk which frequent the hill behind my house when deep snows push them down to a sane altitude.


https://i.postimg.cc/KYLQV89s/255-gr-9-3mm.jpg (https://postimg.cc/XZjwB46w)

I just have say, I giggled with pure delight when I shot these groups.

https://i.postimg.cc/dVg44y9y/255-gr-9-3x62-great-groups-2.jpg (https://postimg.cc/5XqBtjT4)

01-03-2019, 10:38 AM
That is excellent accuracy with very good speed Alan..
I would be giggling also with those groups..

01-03-2019, 07:58 PM
I have shot a few of the NOE 285 in my 9.3x57 with fairly good results.


01-04-2019, 01:00 AM
Veral told me to shoot water filled 1-gallon milk jugs, extending the distance out with each shot. He said if the jug fairly exploded, it would be good for elk. If it simply punched a hole, the bullet had surpassed it's effective range. I took some vids of some gallons jugs exploding at 25, 50 and 110 yds. I tried to post the vids but no luck.


01-04-2019, 01:26 AM

Is this a good mold for my CZ Fullstock 9.3x62? The pickings are slim so I don't want to wait too long before I order.

I own that mold and use it in my 9.3x57. Buy it, it's good. Honestly it seems to shoot better than the 270gr soft point Speers do, which is great for me. I don't like paying $20 for 50 bullets.