No 357 carbine in old Rossi

[farmbif]

Does anyone know if this will load in an older Rossi
My pre safety gun will only chamber h&g 503’s in 357 brass
I use special brass for SWC molded boolits
The 170+ grain carbine mold currently in last call would make a great hunting round I would expect

[marlin39a]

Only way to know for sure, is to try it.

[farmbif]

Your right about that hopefully it it work looks like it seats deeply

[35 Whelen]

My Rossi .357, which I bought new somewhere around 2011, will feed the lanky 358429 bullet. You can't prissy around with it, and have to work the lever like it's your ex-wife, but she'll feed 'em!

35W

[bob208]

my early rossi likes the 358429 loaded long in .38 cases with 12 gr. 2400.

[Texas by God]

My Rossi 62 SRC Puma choked on .357s but ate.38 Special like candy. Tried to remedy it but quit caring and just loaded .38s for it.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[35 Whelen]

My Rossi 62 SRC Puma choked on .357s but ate.38 Special like candy. Tried to remedy it but quit caring and just loaded .38s for it.

Sent from my SAMSUNG-SM-G930A using Tapatalk

MY Rossi, probably from "over-slicking" started flipping .38's out instead of chambering them, but runs .357's easily.

35W

[Groo]

Groo here
Remember that the older design SWC bullets[Keith} were made for 38spec cases and have long noses..
When loaded in 357 cases they are too long for the Rossi action[longer than 1.6in also too long for the short cylinder guns like the M-28]
Check the OAL...