PDA

View Full Version : Any loads for WC820 in 223?



Lee W
12-02-2005, 07:43 PM
I ordered 8lbs of wc820 from patsreloading today and I am looking for loads people have used with success. I have a mini-14 and an NEF single shot. (1:9 twist and 1:12 respectively)
I have seen some loads, such as this:

http://www.castpics.net/RandD/load_data/223/223_rem.htm

I am loading Saeco 60 gr. SPGC (lino) with Rooster labs hvr sized .225.
Any info is helpful.
Thanks.

Bullshop
12-02-2005, 08:56 PM
Lee W
I have had a hankerin to try that #. I shure would like to see an actual specimen. Can I buy like ten of them from you as cast, unsized and unlubed?
BIC/BS

Lee W
12-02-2005, 09:22 PM
Cash not needed. PM me your address and I will send you a bunch. :lovebooli

Buckshot
12-04-2005, 05:33 AM
..............LeeW, that info was from me about 7 years ago. The rifle was a Savage M112, 26" bbl with a 12" twist. I'd just use your WC820 and start at the start loads shown and go from there. Groups were very good. I just checked my FotoTime place and don't have any of those groups uploaded.

..............Buckshot