PDA

View Full Version : BruceB 's thread on primer contamination



Shuz
11-17-2018, 11:42 AM
I tried to do a "search" on the above and couldn't find anything. HELP!

By the way, is old BruceB still with us? His info shows "On Heaven's Range". His last post shows 2015.

Grmps
11-17-2018, 12:12 PM
Bruce is only with us in spirit.

"On Heaven's Range" means he is with God.

JBinMN
11-17-2018, 02:36 PM
I went and did some searching, and it seems to me that it was not a topic/thread. It was a post:
http://castboolits.gunloads.com/showthread.php?73705-Primers-degrade&p=790197&viewfull=1#post790197

in a topic called, Primers degrade?

and can be found here:
http://castboolits.gunloads.com/showthread.php?73705-Primers-degrade

G'Luck! I hope that was what you were looking for...
:)

P.S. - It may not be in the CB.GL. forum. I did not find it as a topic , even by going back thru the topic titles that BruceB posted himself. So, either of such a topic exists it maybe is under a different name, or in another forum ( I searched THIS forum( archives)) or it was in some other members topic.

Newboy
11-17-2018, 04:47 PM
I have experienced few primer failures.

I did pick up some .38 brass one time, reloaded them, and had multiple failures. I had been loading for many years, and was puzzled. What I found, was someone had used those cases to reload wax bullets, and there was still a wax residue in the cases.

So I can say that paraffin wax will ruin primers.


Sent from my iPhone using Tapatalk Pro

Land Owner
11-18-2018, 06:19 AM
G'Luck! I hope that was what you were looking for...

The summary in that thread is good. I remember Bruce B's detail, but have no clue what his thread's were titled or whether they were a response to another post.

rockshooter
11-19-2018, 02:00 AM
Newboy- if you still have those wax bullet cases, best to toss them- typically the flash holes are enlarged.
Loren

Shuz
11-19-2018, 11:54 AM
I went and did some searching, and it seems to me that it was not a topic/thread. It was a post:
http://castboolits.gunloads.com/showthread.php?73705-Primers-degrade&p=790197&viewfull=1#post790197

in a topic called, Primers degrade?

and can be found here:
http://castboolits.gunloads.com/showthread.php?73705-Primers-degrade

G'Luck! I hope that was what you were looking for...
:)

P.S. - It may not be in the CB.GL. forum. I did not find it as a topic , even by going back thru the topic titles that BruceB posted himself. So, either of such a topic exists it maybe is under a different name, or in another forum ( I searched THIS forum( archives)) or it was in some other members topic.

Thanks, JB, that was the thread I was thinking about.--Shuz

JBinMN
11-19-2018, 12:32 PM
Glad to have been of help!
:drinks:
:)

MT Gianni
11-20-2018, 11:20 AM
I have had cartridges carried in the outside pocket of a nylon cordura pack too wet to fire. The primers were not sealed. I also wet down some primed cases with WD 40 then let them dry for a week, All 6 fired though they were shot as primer only.