PDA

View Full Version : Kudos to Kenjuudo



Haywire Haywood
11-30-2005, 09:42 PM
Jim offered to tweak that 35cal LBT mould that was dropping small shanks for the cost of return postage. I took him up on his offer not knowing what to expect. What I got was above and beyond. He put a step shank similar to what Mountain Moulds puts in theirs per my request. He made the first cut, cast a few, decided that it didn't suit him and recut it. He sent it back to me with sample casts and samples from another mold that he thought I might be interested in.
I cranked up the pot and cast up 50 or so from the tweaked mould and the results are perfect. Checks now are a press fit and are one with the boolit when crimped.

This isn't a good guy report. This is an exceptional guy report.

Thanks Jim,
Ian

PatMarlin
12-03-2005, 12:02 PM
Jim's my Hero.. :mrgreen:

Buckshot
12-04-2005, 02:22 AM
.........Yeah, I kinda think he's okay too. Can't quite put my finger on why :D, but there it is[smilie=l:

...............Buckshot

Rick N Bama
12-04-2005, 04:22 PM
I owe Jim a ton of thanks myself for the help he's given me with learning the ways of boolit casting.

Thanks Jim!

Rick