NOE 432-264-SWC-AT5 4 cavity PB (H&G503)

[mcmdphd]

I am awaiting a new mould: 432-264-SWC-AT5 4 cavity PB (H&G503) to cast for my Ruger SRH and Marlin 1894. Any experience to pass along regarding this mould or loads that you found beneficial for hunting?

[missionary5155]

Greetings mcmdphp
We have one but have not filled it up with hot lead as we are trying to use up years worth of old cast slugs.
Mike in ILLinois

[Thumbcocker]

Loads that have taken deer for me with Keith boolits:

18.5 of 2400
20.0 of 2400
22.0 of 4227
22.0 of H110

[Oklahoma Rebel]

I do believe that's the same one I have, except mine is aluminum and 2 cavity, with no HP it weighs 275gr as cast, with an alloy of about 2.5%sn/2.5%sb. I load it over a charge of 21.5gr of 296, and it will penetrate any animal on the continent, I am sure of that! I am going to try working the charge up to 21.8, then 22grs, but even with 21.5 it is plenty powerful, and the recoil ain't bad. I am just looking for the sweet spot! I am shooting these out of a ruger super Blackhawk bisley hunter model, my most valuable and favorite gun to date. my sks is a close second. - Travis